G-TEC TTCF-9A : Heavy Duty Heated Cooler Line Flusher w/ Variable Speed

Product Description

Key Product Features:

• Variable 1–8 GPM flow rate: Allows the technician to adjust fluid output for different component sizes and system requirements, including high-flow heavy-duty transmission cooling systems.
• Broad application range: Suitable for cleaning automotive transmission coolers and lines as well as compatible heavy-duty hydraulic systems and components.
• Heavy-duty 3/4 HP motor: Delivers the power needed to circulate fluid through larger cooling systems, long lines, and more restrictive hydraulic components.
• Heated flushing process: Uses heated system-compatible fluid to soften varnish, sludge, and hardened deposits so they can be circulated out of the connected component.
• Fast heating circulation mode: The manufacturer states that the system can heat fluid to its preset temperature of approximately 140°F in about 45 minutes under specified operating conditions.
• Uses system-compatible hydraulic fluid: The machine can use the same type of hydraulic or transmission fluid required by the system being cleaned, helping avoid incompatible cleaning chemicals.
• Preprogrammed flush cycles: Provides selectable automated cleaning programs that simplify setup and help technicians maintain consistent flushing procedures.
• Selectable 15-to-120-minute flush times: Allows the operator to choose an appropriate timed cycle based on system capacity, contamination level, and service requirements.
• Continuous flushing option: Supports extended operation when additional cleaning time is needed beyond the programmed cycles.
• Automatic cycle completion: Stops the machine and provides an alert when the selected flush cycle has ended.
• Flush-cycle results display: Provides operating information at the end of the cycle to help technicians document and evaluate the completed service.
• GPM-dependent air-injection patterns: Two automatically selected flushing patterns introduce an optimized amount of air based on the operating flow rate.
• Agitating air-scrub action: Controlled air injection increases turbulence inside cooler passages and hydraulic lines to help dislodge trapped debris and solidified varnish.
• Manual air purge: Allows technicians to force remaining fluid from the connected component and service hoses after flushing.
• Manual flow-reversing valve: Changes fluid direction without requiring the service hoses to be removed and reconnected.
• Bidirectional cleaning: Reversing the flow helps attack contamination from both directions and improves cleaning of restricted passages.
• 60-micron cleanable screen filter: The reusable filter screen captures visible debris and allows technicians to verify system cleanliness during or after the flush.
• T-handle filter access: Simplifies removal and inspection of the reusable screen filter.
• Dual magnetic spin-on filters: Two non-bypass replaceable filters help capture fine debris and metallic contamination circulating through the machine.
• Filter-usage timer: Displays the operating hours accumulated on the spin-on filters to support timely replacement and preventive maintenance.
• Flow monitoring: The control panel displays system flow so technicians can adjust pump speed and identify restricted cooling circuits or hydraulic components.
• Pressure monitoring: Displays system pressure during the flush, helping the operator identify restrictions and avoid unsuitable operating conditions.
• Temperature monitoring: Shows fluid temperature so the technician can confirm that the machine has reached an effective heated-cleaning range.
• Total-hours meter: Tracks cumulative machine operating time to support shop maintenance schedules and equipment-use records.
• Low-fluid safety sensor: Automatically shuts off the heater and pump when the reservoir fluid level becomes too low, helping protect major operating components.
• 10-gallon fluid capacity: Provides sufficient working-fluid volume for automotive and heavy-duty component flushing while maintaining a mobile shop footprint.
• Easy-to-read tank sight glass: Allows technicians to check reservoir fluid level without opening the tank.
• Heavy-duty 13-foot service hoses: Long 3/4-inch hoses provide the flow capacity and reach required for large vehicles and heavy-duty components.
• Dedicated electrical supply: Requires a dedicated 20-amp circuit or two separate 15-amp circuits, according to available product specifications.
• Manufacturer part number: 40400060.
• Professional applications: Ideal for heavy-duty truck service centers, transmission rebuilders, fleet maintenance operations, construction equipment facilities, agricultural equipment shops, hydraulic repair centers, and automotive dealerships.

Why Buy from ProQuip Solutions:

Purchase the G-TEC TTCF-9A from ProQuip Solutions for a powerful, adaptable cleaning solution built for both automotive and heavy-duty transmission cooling systems. With knowledgeable assistance selecting compatible adapters, filters, hoses, fittings, and replacement components, ProQuip Solutions helps service facilities improve flushing consistency, confirm system cleanliness, protect replacement transmissions, and reduce costly comeback repairs.