G-TEC TTCF-8 : Heated Flusher

Product Description

Key Product Features:

• Deluxe heated flushing system: Cleans transmission cooler lines, heat exchangers, and related components before the installation of a rebuilt or new transmission.
• Heated pulsating cleaning action: Combines heat and fluid pulsation to soften hardened ATF varnish and dislodge contamination trapped inside narrow cooler passages.
• Helps prevent repeat repairs: Removes residual debris that could contaminate and damage a replacement transmission after installation.
• Cleans multiple contaminant types: Helps remove metallic particles, clutch material, sludge, degraded fluid deposits, and waxy varnish from the transmission cooling system.
• 10-gallon all-steel tank: Provides durable fluid storage for professional transmission service and rebuilding environments.
• Immersion heating system: Heats the flushing fluid inside the reservoir to improve varnish removal and cooler-passage cleaning.
• Commercial-grade motor: Uses a heavy-duty motor designed for repeated operation in automotive and transmission service facilities.
• 1/3 HP motor: Provides dependable pump performance for professional cooler-line flushing applications.
• 1,750-pulse-per-minute pump: Produces pulsating fluid movement to agitate and remove contamination from the connected cooling circuit.
• 3.2 GPM flow rate: Delivers consistent fluid circulation through automotive transmission cooler systems.
• 5 GPM flowmeter: Allows technicians to observe fluid movement and evaluate whether the cooler or lines may be restricted.
• Manual flow-reversing valve: Reverses flushing direction without requiring the technician to disconnect and switch the service hoses.
• Bidirectional cooler flushing: Attacks debris from both directions to improve cleaning inside restricted passages and heat exchangers.
• Initial fluid purge valve: Removes the first amount of heavily contaminated fluid before it enters the main reservoir, helping extend filter and flushing-fluid life.
• Air purge system: Uses shop air to remove residual fluid from the cooler system and service hoses after the flush.
• Air-injection scrubbing: Allows air to be introduced during cleaning for added agitation against difficult deposits.
• Cleanable screen filter: Includes a reusable screen filter with a T-handle that simplifies inspection and verification of system cleanliness. The current G-TEC catalog lists it as a 60-micron screen.
• Visual contaminant verification: The accessible screen filter lets technicians examine material removed from the transmission cooling circuit.
• Dual spin-on filters: Two non-bypass filters capture debris removed during the heated flushing process.
• Magnetically charged filtration: Helps capture metallic particles produced by internal transmission wear or component failure.
• Total-hours run meter: Tracks cumulative operating time to help shops plan filter changes, fluid replacement, and routine equipment maintenance.
• Temperature gauge: Allows technicians to monitor flushing-fluid temperature throughout the heating and cleaning process.
• Low-fluid heater protection: The G-TEC platform uses fluid-level protection to prevent heater operation when the reservoir level becomes too low.
• Eight-foot service hoses: Includes 5/8-inch hoses that provide practical reach between the machine and transmission cooler connections.
• Extensive included adapter coverage: Includes Domestic, Banjo, Honda, SDA, P1, P2, P3, P4, Honda/Acura Puck P6, and Audi/VW/Nissan adapter sets.
• Supports broad vehicle coverage: The included adapter assortment helps shops service many domestic, European, and Asian transmission cooler configurations.
• Additional optional adapters available: P5-series, P7, and RVW adapters are identified by the manufacturer as optional rather than standard TTCF-8 equipment.
• Integrated tool tray: Provides convenient storage for adapters, fittings, and frequently used service tools.
• Vent tower: Supports the machine’s air-purge and fluid-management functions.
• Protected pump and motor assembly: The enclosed design helps protect primary operating components and supports organized hose storage.
• Serviceable professional construction: Replaceable filters, hoses, fittings, heater components, and adapters support continued equipment operation.
• Routine maintenance guidance: Manufacturer instructions recommend replacing the spin-on filters approximately every 100 flushes and periodically replacing the flushing ATF based on condition and usage.
• Manufacturer part number: 40400038.
• Professional applications: Ideal for transmission rebuilders, automotive dealerships, independent repair facilities, fleet maintenance departments, remanufacturing operations, and technical training centers.

Why Buy from ProQuip Solutions:

Purchase the G-TEC TTCF-8 from ProQuip Solutions for deluxe transmission cooler cleaning equipment and knowledgeable assistance selecting compatible filters, adapters, replacement hoses, fittings, and service components. ProQuip Solutions helps transmission professionals verify cooler cleanliness, improve vehicle coverage, protect replacement transmissions, and reduce costly comeback repairs with proven heated flushing technology.