MaxiSYS Accessories

Autel AUTELMAIN-CABLE : Autel Main OBDII Replacement Cable

Autel AUTELMAIN-CABLE: Autel Main OBDII Replacement Cable   SKU: 849438003982   The AUTELMAIN-CABLE is a replacement OBDII cable. It is compatible with tools in the MaxiSYS line that use the MaxiSYS-VCI, MaxiTPMS tools, and newer AutoLINK tools.

Autel BENZ14 : Benz 14-pin

The BENZ14 is a 14-pin off-highway vehicle adapter for use on construction and agriculture machines and vehicles operating off-road using Mercedes-Benz engines. Compatible with the MaxiSYS 909CV tablet and VCI (with applicable software updates), the...

Autel CANFD-ADAPT : MaxiSYS CAN FD Adapter

CAN FD Adapter Enables Diagnostics of Vehicles Using CAN FD ProtocolCAN FD is a faster, more reliable and more secure protocol. The Autel CAN FD Adapter connects to compatible VCIs to enable the tablet to communicate via the CAN FD communications...

Autel CAT9 : MaxiSYS CV CAT 9-Pin Adapter

The CAT9 adapter is a 9-pin off-highway vehicle adapter for use on construction and agriculture machines and vehicles operating off-road using Caterpillar engines. Compatible with the MaxiSYS MS909CV tablet and VCI (with applicable software updates), the...

Autel CUMMINS8 : Cummins 8-pin

The CUMMINS8 is an 8-pin off-highway vehicle adapter for use on construction and agriculture machines and vehicles operating off-road using Cummins engines. Compatible with the MaxiSYS 909CV tablet and VCI (with applicable software updates), the Cummins8...

Autel DIY-CABLE: MaxiSYS Acc. OBDII Cable Older DIY Tools

Autel DIY-CABLE: DIY OBDII Replacement Cable   SKU: 849438004064   The DIY-CABLE is a replacement OBDII cable. It is compatible with older model Autel AutoLINK tools.

Autel HALDEX4 : Haldex 4-Pin CV Adapter

The Autel Haldex 4-Pin Adapter connects directly with the ABS module for diagnostics of Haldex trailer braking systems. Autel MaxiSYS CV tablets offer Haldex braking systems diagnostics software coverage. Covered by a one-year limited warranty. 

Autel KOMATSU12 : KOMATSU12 Adapter

The CAT9 adapter is a 9-pin off-highway vehicle adapter for use on construction and agriculture machines and vehicles operating off-road using Caterpillar engines. Compatible with the MaxiSYS 909CV tablet and VCI (with applicable software updates), the...

Autel MAINCABLEV2 : Replacement OBDII Cable for MX900

The MAINCABLEV2 is a replacement OBDII cable compatible with the Autel MaxiCHECK MX900. The Autel-branded cable provides 15-pin compatibility with the MX900 tablet and 16-pinout compatibility with vehicle OBDII port. The MAINCABLEV2 is covered by a...

Autel MaxiSYS-VCI : Communication Interface

The MaxiSYS-VCI is a wireless Bluetooth vehicle communication interface that connects to the vehicle’s DLC and is compatible with the MaxiSYS tablets enabling technicians to perform diagnostics while outside of the vehicle. The MaxiSYS-VCI is housed in a...

Autel MaxiSYS-VCI100 : Bluetooth VCI

Autel MaxiSYS-VCI100: Bluetooth VCI Vehicle Communication Interface   SKU: 849438003685   The MaxiSYS VCI 100 provides a Bluetooth wireless connection to MaxiSYS Tablets. It also supports comprehensive diagnosis when used with MaxiSYS Tablets. The...

Autel MCV2MSU9 : Main Cable V2.0

The AUTELMAIN-CABLE is a replacement OBDII cable. It is compatible with tools in the MaxiSYS line that use the MaxiSYS-VCI, MaxiTPMS tools, and newer AutoLINK tools. 

Autel MFVCI : MaxiFLASH VCI

Autel Maxiflash Vehicle Comm Measurement Interface Vcmi (MFVCMI)Autel MFVCMI - MaxiFlash Vehicle Communication Interface (VCI) And J2534 Pass-thru Programmer - 4-Channel Oscilloscope & Digital Volt Ohm MeterBuilt-in 4-Channel Oscilloscope &...

Autel MFVCIKIT : MaxiFlash VCI Kit

The MaxiFlash VCI Kit, compatible with the MaxiSYS MS909 advanced diagnostic tablet, includes a bluetooth-enabled vehicle communication interface (VCI), a J2534-compliant pass-thru programming device. This VCI Kit also includes an Autel Main Cable V2.0,...

Autel MFVCMI : MaxiFLASH VCMI

Autel MFVCMI - MaxiFlash Vehicle Communication Interface (VCI) And J2534 Pass-thru Programmer - 4-Channel Oscilloscope & Digital Volt Ohm MeterBuilt-in 4-Channel Oscilloscope & Digital Volt Ohm MeterBuilt-in Waveform Generator & CAN bus...

Autel MFVCMIKIT : MAXIFLASH VCMI KIT

MaxiFlash VCMI Vehicle Communication Interface, J2534 pass thru programmer, 4-channel oscilloscope, waveform generator, multimeter, and CAN-Bus testerCompatible with the MaxiSYS Ultra and MaxiSYS MS919 diagnostic tabletsVCMI can be powered independently...

Autel MS908-ACADAPTER : Replacement AC Adapter for MaxiSYS Tablets

Autel MS908-ACADAPTER: AC Adapter for MaxiSYS Tablets   SKU: 849438004491  

Autel MSOAK : MaxiSYS Oscilloscope Accessory Kit

The MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and...

Autel MSOBD2KIT : MaxiSYS Non-OBDII Adapter Kit

The MSOBD2KIT, compatible with the MSUltra, MS919 and MS909, includes OE-compliant adapters for specific vehicles produced between 1996 and 2002 without the standard OBD2 pin configuration. Connectors Include Nissan-14, Mitsubishi/Hyundai 12+16, Kia-20,...

Autel MSPRO-CABLE : MaxiSYS Pro OBDII Replacement Cable

Autel MaxiSYS Pro OBDII Replacement Cable   SKU: 849438004026   The MSPRO-CABLE is a replacement OBDII cable. It is compatible with tools using the MaxiFlash Elite.

Autel NIS1632 : Nissan 16+32 ByPass Cable

AUTEL Nissan 16+32 ByPass CableAccess the secure gateway on Nissan Sentra 2020 and newer models. This access cable is needed for any bi-directional controls, active tests, and special functions including IMMO Add Key, IMMO replacement. OE-style...

Autel TESCDAC : Tesla Diagnostic Adapter Cable

Diag cable for Tesla 3, Y, S, and X vehicles, 12 and 20 pin to 16 pin adapterThe TESCDAC is a Tesla-compatible diagnostic cable that can be connected to Tesla X, S, Y, and 2021 and newer 3 models to perform diagnostics, compatible with any Autel Ultra...

Autel TESKIT3Y : Tesla 3 and Y-Compatible Adapter

Tesla 3 and Y model vehicles-compatible diagnostic cable adapter. Diagnostic software for Tesla 3 and Y models available on an Ultra series tablet. Connect to vehicle and Autel vehicle communication interface (VCI).  Connection instructions included...

Autel TrailerPLC : Trailer PLC Connector to 7-Way Plug

Autel TrailerPLC: Trailer PLC Connector to 7-Way PlugThe Chrysler / Fiat 12+8 Connector is an OBDII cable adapter that allows for access to late model Chrysler vehicles by connecting directly to the wiring harness.

Autel ULTRAACADAPT : Ultra AC Adapter

Replacement power supply for Ultra series tablets including Ultra, Ultra EV, and Ultra ADAS tablets. AC/DC 12- volt power supply. Includes main unit and AC plug.  

Autel VOLVO14 : Volvo 14-Pin CV Adapter Cable

The Autel Volvo 14-Pin CV Adapter Cable can be used to connect with Volvo Off-road construction vehicles to perform diagnostics with the Autel MaxiSYS MS909CV tablet. The adapter is covered by a one-year limited warranty.  

Autel VOLVO8 : Volvo 8-Pin CV Adapter Cable

The CUMMINS8 is an 8-pin off-highway vehicle adapter for use on construction and agriculture machines and vehicles operating off-road using Cummins engines. Compatible with the MaxiSYS 909CV tablet and VCI (with applicable software updates), the Cummins8...

Autel XLINK : MaxiFLASH XLINK ECU Programming Device

MaxiFlash XLink is a powerful expert-driven remote diagnostics solution ideal for repairs and module programming. Equipped with a 4-inch touchscreen, the XLink enables remote programming and local diagnostics.Remote Expert-ready standalone device:...