Accessories

BendPak 5174011: Airline Kit for Hd-18E / 27X / 35X / 40X

BendPak 5174020: Turf Lift Accessory Kit

BendPak 5174042: Turf Lift 7K Accessory Kit

BendPak 5174497: Aluminum Ramp Kit Std 36" Alu. Ramp Kit

The 36" Aluminum Ramp Kit is engineered for controlled, low-profile vehicle loading on BendPak HD-7 and HD-9 series Four-post lifts (excluding HD-9SW/SWX models). Designed for situations where space efficiency meets performance, these ramps provide a...

BendPak 5174670: Aluminum Ramp Kit Ext 48" Alu. Ramp Kit

BendPak 5174705: Aluminum Ramp Kit Ext 48" Alu. Ramp Kit

BendPak 5210055: Steel Ramp Kit Ext 48" Steel Approach Ramps

With 48" of length, BendPak’s optional Steel Ramps are significantly longer than standard four-post lift approach ramps, so super-low-profile cars can more easily glide onto the runways without risk of damage to your vehicle. These Steel Ramps also...

BendPak 5210174: Alum Deck Long-Narrow

The BendPak Aluminum Deck is designed to work with most HD-7 and HD-9 four-post lifts, specifically the HD-7PXN, HD-7PXW, HD-9STX, HD-9XW, HD-9XL, and the HD-9SWX, instantly transforming them into versatile storage platforms. Its lightweight, two-piece...

BendPak 5210207: Alum Deck Short-Narrow

BendPak 5210208: Alum Deck Long-Wide

BendPak 5210209: Aluminum Deck / Short-Wide

The BendPak Aluminum Deck is designed to work with HD-7 and HD-9 four-post lifts, specifically the HD-7W, HD-9, and the HD-9SW, instantly transforming them into versatile storage platforms. Its lightweight, two-piece design makes installation and removal...

BendPak 5210325: Steel Ramp Kit Ext 48" Steel Approach Ramps

BendPak 5210328: Steel Ramp Kit Ext 48" Steel Approach Ramps

BendPak 5210997: Portable Wheel Kit

Caster Kit (5210997) Portable Wheel Kit / Fits HD-7 and HD-9 Series Four-Post Lifts / SET OF 4 Mobilize your BendPak HD-7 and HD-9 series four-post lifts with this high-quality caster kit. Move your lift all around the shop and avoid inconvenient...

BendPak 5215756: Steel Lift Pad 2-Post Steel Set Of 4

BendPak 5215757: Low Adapter 2-Post Stack Truck/Van Set Of 4

BendPak 5215758: Med Adapter 2-Post Stack Truck/Van Set Of 4

BendPak 5215761: Frame Cradle Pad 2-Post Set Of 4

BendPak 5215763: Steel Lift Pad 2-Post Pad - Steel Set Of 4

BendPak 5215848: Frame Cradle Pad 2-Post Wide Frames Set Of 2

BendPak 5585280: Lift Power Unit 3.6 Gal Reservoir 2.5 Hp

BendPak 5585285: Lift Power Unit 3.6 Gal Reservoir, 2.5 Hp

BendPak 5585435: Lift Power Unit 1.6 Gal Reservoir, 1.5 HpMtr

BendPak 5601179: Offset Pad Adapter Set Of 4

BendPak 5700217: Rubber Pad Polyurethane - Square - Set Of 4

These replacement rubber lift pads outfit your BendPak two-post lift with extra carriage-gripping capabilities. Textured surface reduces slipping, and the slip-over design makes installation easy.

BendPak : Airline Kit for HD-14 Rolling Bridge Jack

BendPak Airline Kit: Integrated Rolling Bridge Airline Kit ‚  SKU: 5174009 ‚  The AK-14 integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling...

BendPak : Airline Kit for Hd-18/27/35

BendPak : Airline Kit For Xr Series Scissors Lifts

BendPak : Deluxe Turnplate Set, Alum- SS, Set Of Two

BendPak : Dp-30 18 Gal Rolling Drain Pan

BendPak : JP45 4,500 Lb. Cap. Telescoping Jack Tray

 The JP45 bottle jack tray holds one or two bottle jacks (not included) that let you get a vehicle's wheels off the runways of a 4-post lift, making it easier to perform wheel and suspension work. Its telescoping arms allow to fit on most four-post lifts...

BendPak : Lift Pad Assy. 2-Post Pad Incl. Polyurethane Tuf-Pad

BendPak : Lift Power Unit, 8.5 Gal Reservoir, 2.5 HP

BendPak : LR-4A Arm Kit

Fits LR-60, LR-60P, P-6B and P-6BFEasy-to-use optional arm kit fits BendPak low-rise models LR-60, LR-60P, P-6B and P-6BF.   

BendPak : P9000 Series Optional Arm Kit

Fits P-9000LT and P-9000LTF. Easy-to-use optional arm kit fits BendPak's P-9000LT and P-9000LTF low-rise car lift.

BendPak : Pcl-18B Cross Beam w/ Stacking Adapter Set

The PCL-18B cross beam is an adapter that rests between two PCL-18B mobile lift columns, crossing under the frame of the vehicle being lifted. This lets operators perform wheel service on vehicles when using BendPak’s mobile lifts.

BendPak : Plastic Drip Trays Set Of Two

BendPak 5700301 | Plastic Drip TraysPlastic drip trays are great for protecting the lower vehicle. A light-weight, cost-effective solution to drips, these drip trays will catch harmful fluids and keep them in one place to protect your vehicles and garage...

BendPak : RJ-45 Specialty Adapter Kit Includes Sliding Pads and Sliding Receivers

BendPak : Steel Ramp Kit /Ext 43" Steel Approach Ramps

BendPak : Tall Adapter 2-Post Stack Truck - Van Adapter Set Of 4

BendPak : TC-3000 - 3000 Lb Telesc Boat Trailer Tongue Platform

This telescoping boat trailer tongue platform makes it easy to load your boat trailer onto a BendPak four-post lift. The "third" boat trailer wheel securely fits into the TC-3000 platform, which effortlessly slides between the runways. The other two...

BendPak : Wsa-100 Lt-Med 2, 4 Air-Elec Work Station

BendPak APEX 5210536 : 2-Post Stacking Truck-Van Adapter - 63mm - 50mm Pin - Set of 4

2-Post Stacking Truck/Van Adapter / 63mm / 50mm Pin / Set of 4Medium-height lift adapters for improved vehicle reach and enhanced lift point flexibility on compatible APEX two-post lifts.The APEX Medium Adapter Set provides additional lift pad height to...

Challenger 10266 : 36" Long Louvered Ramp Kit

Challenger 10266, 36" Long Louvered Ramp Kit, for drive-through operation (4P14, 4015 series only)

Challenger 10266L : 48" Long Louvered Ramp Kit

Challenger 10266L, 48" Long Louvered Ramp Kit, for low profile vehicles (4P14, 4015 series only)

Challenger 10267 : 32 Gal. Capacity : Oil Drain Pan Kit

Challenger 10267, 32 Gal. Capacity, Oil Drain Pan Kit (4P14 series, 4015 series, 44018 series & 44030 series)

Challenger 10310 : Air and Electric Workstation

Challenger 10310, Air and Electric Workstation with filter/lubricator/regulator for 4-post lifts

Challenger 10313 : Stack Adapter Extension - 6"

Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Lift out the screw pad, drop in the stack adapter extension and replace the screw pad to reach lifting points.Part # 10313Sold In Pairs.

Challenger 10315 : Stack Adapter Kit

Stack Adapter Kit for 10K and 12K 2-post lifts. Includes: - (4) 3 in. Stack Extensions - (2) 6 in. Stack Extensions - (2) Organizer Racks with hardware

Challenger 10316 : Organizer Rack : Stack Adapter Extensions

Challenger 10316, Organizer Rack, Stack Adapter Extensions (10315, 10314, 10313, & 10318)

Challenger 10317 : Reducer Bushing Kit

Challenger 10317, Reducer Bushing Kit for use with 10318 with 15K/18K 2-post lifts (set of 4)

Challenger 10333 : Sprinter Engagement Kit

Sprinter adapter kit includes (2) pin adapters and (2) cradle adapters for 15000-3S series only