Transmission Jacks

AFF 2158 : Transmission Jack 1100 Lb

TRANSMISSION JACK 1100 LB Single-stage telescopic ram for use on automobile, light truck and van transmissions, transfer cases or differentials in under-hoist applications.   Universal head provides...

AFF 3052A : 1,100 Lbs Air Assist Telescoping Transmission Jack

AFF 3052A 1,100 Lbs Air Assist Telescoping Transmission Jack

AFF 3102 : 2000 lb. Manual Hydraulic Transmission Jack

AFF 3102: 2000lb Manual Hydraulic Transmission Jack   SKU: 3102   Two stage telescopic ram designed for medium duty transmissions, transfer cases, and differentials Double pump hydraulic...

AFF 3160 : 450 lb. Transmission Jack

TRANSMISSION JACK 450 LB Adjustable head for easier positioning and alignment Nylon safety strap to secure load Requires 1/2" drive ratchet (not included) 450 lb. capacity Height: 7-1/4" -...

AFF 3165 : Transmission Adapter

TRANSMISSION ADAPTER   Converts any AFF 350 series or Viking floor jack (or others with a 1-1/8" saddle stud) to remove and install automobile transmissions, transfer cases and differentials...

AFF 3171A : 1000Lb Truck Transmission Jack

AFF 3171A : 1000 Lb Truck Transmission JackIdeal for light to medium weight truck transmissionsLow profile style provides superior clearanceWide chassis design for efficient load distribution and...

AFF 3172A : 2000Lb Truck Transmission Jack

AFF 3172A : 2000Lb Truck Transmission JackIdeal for light to medium weight truck transmissionsLow profile style provides superior clearanceWide chassis design for efficient load distribution and...

AFF 3179A : 3000Lb Truck Transmission Jack

AFF 3179A : 3,000 Lb Truck Transmission JackIdeal for light to medium weight truck transmissionsLow profile style provides superior clearanceWide chassis design for efficient load distribution and...

AFF 3180A : 4400 lb. Transmission Jack

TRANSMISSION JACK 4400 LB   SKU: 3180A   AFF has the only super heavy-duty transmission jack with a 4,400 lb. capacity. Built "forge-tough" to handle removal, transport and installation of...

AFF 3182 : 2,500 Lb. Power Train Lift/Table

2,500 LB CAPACITY POWER TRAIN LIFT/TABLE   This lift handles transmissions and fuel tanks as well as engines, transaxles, large electric vehicle batteries, and more. It also serves as a work table...

AFF 3198 : Fuel Tank Adapter

FUEL TANK ADAPTER Converts AFF Model 3190B, 3192A and 2195A transmission jacks to remove and install fuel tanks.   4" x 5-3/4" diameter saddles adjust from 19-3/4" to 31-3/4". Includes two...

AFF 3700 : Clutch & Flywheel Jack 300 Lb.

AFF 3700 Clutch & Flywheel Jack 300 Lb.

AFF 3752 : Splined Shaft 1.75" Dia. X .983" Pilot 4 Model 3700

AFF 3752 Splined Shaft 1.75" Dia. X .983" Pilot 4 Model 3700 Clutch Jack 

AFF 3753 : Splined Shaft 2" Dia. X 1" Pilot For Model 3700

AFF 3753 Splined Shaft 2" Dia. X 1" Pilot For Model 3700 Clutch Jack 

AME VLT6 : Hydraulic Transmission Jack 0.6 Ton

AME VLT6 Hydraulic Transmission Jack 0.6 Ton

BendPak RANGER RTJ-1 : 1 Ton Capacity Telescoping Transmission Jack

BendPak RANGER RTJ-1100 : 1-2 Ton Transmission Jack

BendPak RANGER RTJ-3000 : 1-1-2 Ton Transmission Jack - Truck Model

Esco 10812: Transmission Jack, 2.2 Ton, 10"-35" Height

Hydraulic System is protected with safety overload systemWide chassis design provides maximum stabilityFully adjustable universal saddle, brackets and chain slingFour 4” swivel casters help move jack...

Mahle ATJ-1000H: 1,000 lb. Automotive Transmission Jack - High Rise

Mahle ATJ-1000H: 1,000 lb. Automotive Transmission Jack - High Rise   SKU: 485 80025 00   The ShopPRO ATJ-1000H high-rise automotive transmission jack features the most flexible, usable, and safe...

Mahle CTJ-2200: 2,200 lb. Commercial Vehicle Transmission Jack

Mahle CTJ-2200: 2,200 lb. Commercial Vehicle Transmission Jack   SKU: 485 80031 00   The ShopPRO CTJ-2200 has been continually manufactured since the 1970's and has become the industry's most...

Mahle CTJ-2200A: 2,200 lb. Commercial Vehicle Transmission Jack - Air Assist

Mahle CTJ-2200A: 2,200 lb. Commercial Vehicle Transmission Jack - Air Assist   SKU: 485 80033 00   The ShopPRO CTJ-2200 has been continually manufactured since the 1970's and has become the...

Mahle CTJ-2200ATC: 2,200 lb. Commercial Vehicle Transmission Jack - Air Assist with TCHS Kit

Mahle CTJ-2200ATC: 2,200 lb. Commercial Vehicle Transmission Jack - Air Assist with TCHS Kit   SKU: 485 80034 00   The ShopPRO CTJ-2200 has been continually manufactured since the 1970's and has...

Mahle CTJ-2200TC: 2,200 lb. Commercial Vehicle Transmission Jack with TCHS Kit

Mahle CTJ-2200TC: 2,200 lb. Commercial Vehicle Transmission Jack with TCHS Kit   SKU: 485 80032 00   The ShopPRO CTJ-2200 has been continually manufactured since the 1970's and has become the...

Norco 72000E: 1-1/2 Ton Transmission Jack

  1 1/2 Ton Capacity Truck Transmission Jack   INTENDED USE:For heavy truck transmissions. Ideally suited for truck dealers, maintenance and heavy duty transmission repair centers...

Norco 72001: Differential Adapter For 72000

Differential Adapter For use with models 72000E, 72000Ei, 72700A and 72701A jacks only. Adapter fits most differentials and replaces the universal saddle when used. Weight: 29 lbs.

Norco 72002: Ratchet Security Straps for Transmission Jacks

  Used to secure the load on any NORCO transmission jack. FEATURES: Rubberized coating on hooks

Norco 72003: Fuller Eaton Roadranger Trans. Saddle Adapter

  For use with models 72000E & 72000Ei jacks only. 

Norco 72004: Ford 6R140 Transmission Adapter

For use on Ford 6R140 Transmissions.  

Norco 72025: 1.5 Ton Wide Chassis Truck Transmission Jack

  1 / 2 Ton Wide Chassis Transmission Jack   INTENDED USE:Same as the model 72000E but with a wider chassis opening plus a broader lift range to handle a larger variety of transmission...

Norco 72030B: 300 lb. Hydraulic Clutch Jack

  300 Lbs. Capacity Floor Type Hydraulic Clutch Jack INTENDED USE:To remove, install and transport (in the lowered position) both 14 & 15-1/2 heavy duty clutches and flywheels...

Norco 72033: Flywheel Adapter

Optional equipment for models 72030B and 72035. 

Norco 72034: 300 lb. Underhoist Clutch Adapter

  An optional saddle adapter which is used in conjunction with the above listed NORCO under hoist transmission jacks to remove, install and transport (in the lowered position) both 14 and 15-1/2...

Norco 72035: 300 lb. Telescopic Underhoist Clutch Jack

  300 Lbs. Capacity Telescopic Under Hoist Air / Hydraulic Clutch Jack   INTENDED USE:   Designed for the removal, installation and transportation (in the lowered position) of14 and 15-1/2 heavy...

Norco 72037: Eaton Ultrashift 14 Spline Clutch Shaft

  Optional for 72030B clutch jack.

Norco 72050E: 1/2 Ton Transmission Jack

  1/2 Ton Capacity Transmission Jack   FEATURES:   Wide chassis with open front provides: Wider opening for saddle and transmission to come lower to the ground for easy removal. Efficient...

Norco 72450B: 1/2 Ton Air/Hydraulic Telescopic Transmission Jack

  1/2 Ton Capacity Transmission Jack   Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light...

Norco 72475A: 3/4 Ton Air/Hydraulic Telescopic Transmission Jack - FASTJACK

  3/4 Ton Capacity Telescopic Under Hoist Air / Hydraulic Transmission Jack   Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer...

Norco 72500E: 1/2 Ton Telescopic Transmission Jack

  1/2 Ton Capacity Telescopic Under Hoist Single Pump Transmission Jack   Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on...

Norco 72507B: Ford E40D Truck & 4RIOD Transmission Adapter

  Ford E40D Truck & 4R100 4x4 Transmission Adapter   For use on Ford E4OD and 4R100 (4 wheel drive) truck and van transmissions.

Norco 72512: Ford 6F50 Adapter

  Ford 6F50 Adapter Fits models 72050E, 72675, 72500E,72550B, 72450B, and 72475A. Made in USA For use on Ford and Lincoln 6F50and GM 4T60E transmissions.

Norco 72513: Ford CD4E Transmission Adapter

Ford CD4E Transmission Adapter Fits models 72050E, 72675, 72500E, 72550B, 72450B, and 72475A. Made in USA For use on Ford CD4E transmissions. CD4E Vehicle Applications:1994“2002 Mazda 626...

Norco 72514: Mercedes 722 Transmission Saddle Adapter

  Mercedes 722 Adapter Fits models 72050E, 72675, 72500E, 72550B, 72450B, and 72475A. Made in USA For use on Mercedes #722 transmissions. An optional saddle adapter which is used in conjunction...

Norco 72525: Quick Adjust Transmission Saddle Adapter

Quick-Adjust Saddle An optional saddle that replaces the 4 adjustable corner brackets found on the standard universal saddle. FEATURES: Quickly adapts to the existing universal saddle plate.Four...

Norco 72527: Ford 4F27E Transmission Saddle Adapter

  Ford 4F27E Transmission Adapter Fits models 72050E, 72675, 72500E,72550B, 72450B, and 72475A. Made in USA   For use on Ford 4F27E transmissions. 4F27E Vehicle Applications: Ford EcoSport...

Norco 72528: Ford 6R80 Transmission Saddle Adapter

  Ford 6R80 Transmission Adapter   Fits models 72050E, 72675, 72500E, 72550B, 72450B, and 72475A. Made in USAFor use on Ford 6R80 transmissions.6R80 Vehicle Applications: 2008“2010 Ford...

Norco 72532: Ford DPS6 Transmission Adapter

Ford DPS6 Adapter Made in USA For use with the Ford DPS6 Transmission (Ford Fiesta & Ford Focus)   This transmission saddle works with any NORCO automotive under hoist transmission jack.It is...

Norco 72533: Universal Transmission Saddle Adapter

  DPF & Drive Shaft Installation Support Tool Made in USA Allows for the safe and secure removal and installation of DPFs, Drive Shafts, and automotive transmissions up to 750 lbs.   This...

Norco 72550B: 1/2 Ton Telescopic Transmission Jack, Double Pump

  1/2 Ton Capacity Telescopic Under Hoist Double Pump Transmission Jack Fastjack Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer...

Norco 72674: 1250 lb. Powertrain Lift Table

  1,250 Lbs. Capacity Powertrain Lift / Table Made in USA The powertrain lift/table not only handles transmissions and fuel tanks, but also engines and transaxles, rear ends and leaf springs. Also...

Norco 72700A : 1 Ton Under Hoist Truck Transmission Jack

  1 Ton Capacity Under Hoist Truck Transmission Jack Designed for the removal, installation and transportation (in the lowered position) of heavy duty truck transmissions that are raised by an...

Norco 72701A: 1 Ton Under Hoist Air/Hydraulic Truck Transmission Jack

  1 Ton Capacity Under Hoist Air / Hydraulic Truck Transmission Jack   Same as the model 72700A with the added convenience of an air/hydraulic foot pump. FEATURES:   Air/hydraulic foot pump...