G-TEC TTCF-6 : Heated Cooler Line Flusher (Basic Model)

Product Description

The G-TEC TTCF-6 Heated Cooler Line Flusher is the basic model in G-TEC’s professional transmission component flushing lineup. Designed to clean transmission cooler lines, heat exchangers, and related components before installing a rebuilt or replacement transmission, it uses heated automatic transmission fluid to loosen hardened varnish and remove trapped contamination from the cooling system.

Key Product Features:

• Heated transmission cooler flushing: Circulates heated fluid through transmission cooler lines and heat exchangers to loosen varnish, sludge, and embedded contamination.
• Helps protect replacement transmissions: Cleans the cooling circuit before a rebuilt or new transmission is installed, reducing the chance that leftover contaminants will enter the replacement unit.
• Removes multiple contaminant types: Helps purge metal particles, clutch material, degraded ATF residue, waxy varnish, and other debris from the transmission cooling system.
• Heated cleaning process: The immersion heater raises the temperature of the flushing fluid to help melt hardened deposits and expand the heat exchanger for improved contaminant release.
• Pulsating fluid action: G-TEC’s heated pulsating process helps agitate and dislodge debris that may remain trapped inside cooler passages and connecting lines.
• 3.2 GPM flow rate: Provides strong fluid circulation for effective cleaning of automotive transmission cooler systems.
• Commercial-grade motor: Equipped with a 1/3 HP motor designed for professional transmission and automotive service environments.
• 1,750 RPM pump motor: Delivers consistent fluid movement through the connected transmission cooling components.
• 10-gallon steel tank: The durable all-steel reservoir provides sufficient flushing-fluid capacity while supporting stable shop operation.
• Immersion heating system: Heats the flushing fluid directly inside the tank for effective varnish removal and high-temperature cleaning.
• Temperature-controlled operation: The heater is commonly operated around a factory setting of approximately 150°F to 160°F, following the manufacturer’s operating and safety procedures.
• Pressurized flushing: Circulates hot ATF under pressure to help clear restrictions and contamination from cooler passages.
• Pressure-relief protection: The pump assembly incorporates a pressure-relief valve, with manufacturer documentation specifying a maximum operating setting of 125 PSI.
• Spin-on filtration: Replaceable spin-on filters capture debris removed from the cooler system during the flushing process.
• Eight-foot service hoses: The 5/8-inch service hoses provide practical reach for connecting the machine to transmission cooler systems.
• Domestic adapter coverage: Includes adapters intended for servicing common domestic transmission cooler-line applications.
• Upgradeable basic platform: The TTCF-6 was designed so additional features from more advanced G-TEC configurations may be added as service requirements change.
• Long-established professional design: The TTCF-6 is the original G-TEC basic heated cooler line flusher, with the product platform dating back to 1991.
• OEM-recognized heated flushing technology: G-TEC heated flusher equipment is identified in manufacturer literature as approved by several automotive manufacturers, including Allison, Ford, Honda, Mazda, and Toyota. Technicians should still follow the applicable vehicle manufacturer’s current service procedure.
• 110V AC operation: Requires a 110V AC electrical supply and a 20-amp circuit for proper operation.
• Professional safety design: A low-fluid condition prevents heater operation, helping protect the heating system when the tank does not contain sufficient fluid.
• Serviceable construction: Filters, hoses, adapters, heater components, and other replacement or upgrade items are available to support long-term machine operation.
• Machine dimensions: Approximately 30.75 inches long, 16.5 inches wide, and 33.5 inches high.
• Machine weight: Approximately 114 pounds.
• Professional applications: Ideal for transmission rebuilders, automotive dealerships, independent repair shops, fleet maintenance departments, remanufacturing facilities, and vocational training centers.

Why Buy from ProQuip Solutions:

Purchase the G-TEC TTCF-6 from ProQuip Solutions for professional transmission cooler cleaning equipment and knowledgeable assistance selecting compatible adapters, replacement filters, service hoses, and upgrade components. ProQuip Solutions helps transmission and automotive repair facilities protect replacement units, reduce costly comebacks, and maintain consistent cooler-line cleaning procedures with proven heated flushing technology.