Quest Undercar

AirQuest 1501-08-08 : Fitting 1/2" Male Pipe X 1/2" Female Pipe Swivel 90 Carbon Steel

CARBON STEELMEETS OR EXCEEDS SAE STANDARDS1/2" MALE PIPE X 1/2" FEMALE PIPE SWIVEL 90

Defender 1BC0040010-PAD : Round Rubber Pad

Rubber pad for Defender and Quest Screw-Up Adapters

Defender DB12 : 12,000 LB Symmetric Lift w/ 3-Stage Arms

The DB12 is a powerhouse of a lift. The DB12 features 3-stage front/rear arms that provide maximum extension and retraction ensuring safe and reliable lifting on all vehicles within rated capacity...

Defender DBx10 : 10,000 LB Symmetric/Asymmetric 2-Post Lift

The DBx10 features the ability to be configured in either the symmetric or asymmetric position dependent upon the service requirements of your shop. The DBx 10 features 3-stage front arms that...

Nexion 8-11120050 : Wing Demount Head (Steel)

The design of this tool head has been optimized to use it on all types of tires (normal, soft, low profile, Run Flat/UHP). Stronger: in the area subjected to greatest stress, the material has been...

Oetiker HC2E-0180-ZC/B : Hose Clamp 2-Ear 15mm-18mm (5/8")

Oetiker Hose Clamp 2-Ear 15.0 mm - 18.0 mm (.591" - .709") Carbon Steel Zinc Clear This thin, externally applied layer of zinc provides resistance to corrosion and can give the part a slight tint of...

Quest 2005855 : PowerLok Front Turntables

Pair of stainless turntables with a pneumatic locking device for push & pull compensation. 

Quest 4P12L : Kappa 4-Post General Service Lift

The Quest Kappa 12,000 lb. closed-front drive-on 4-post lift features a low approach angle and wide runways for easy approach. Perfect for all general service needs such as oil changes, exhaust,...

Quest 4PA12L : Kappa 4-Post Alignment Lift w/ Bridge Jack

The Quest Kappa 12,000 lb. closed-front drive-on 4-post lift features a low approach angle and wide runways for easy approach. With integrated alignment plates in front and rear, makes to the perfect...

Quest 5-124635 : Blast Inflation System

Optional Blast Inflation System adds integrated hi-performance blast inflation on Quest, Corghi, Mondolfo Ferro and other Nexion Tilt-back / Twist-back tire changers. 

Quest 5-900078 : Stainless Turnplates (Qnty 2)

Stainless Alignment Turnplates with Handle for Quest 50mm Turnplate Pockets. Fits Corghi, Mondolfo Ferro, Quest, and other Nexion Manufactured Lifts. (1 Pair)

Quest 6455 : Molded Rubber Pad (1 Pair)

Rubber pad assembly (1 Pair) Moulded Polyeurathane pad cover (1pair) Fits J6000H, J7500H, J7000L, J9000H

Quest 8-11100041 : 4" Clamp Extensions (Set of 4)

OE Clamping Extensions for adding 4" of overall clamping capability. For Quest, Mondolfo Ferro, and other Nexion made tire changers

Quest 8-11100042 : 4" Clamping Reducers (Set of 4)

Jaw adapters down to 8" on Quest, various Corghi and Nexion Tire Changers

Quest 8-21100293 : Diagnostic Sonar for Runout Measurement

Thanks to the SONAR sensor (optional), 4 diagnostic programs are available to analyze and solve wheel balance defects, which often cause vibrations that cannot be solved by simple balancing:

Quest A750 : 3D Wheel Alignment System

The Quest Aero A750 is an excellent 3-D alignment system with many features found only in premium brand name products. Super fast compensation process allows for accurate alignment readings in 3...

Quest AD-10001 : Threaded Truck Adapter (Each)

Heavy Duty Screw Adapter w/ Rubber Pad for Quest Undercar Lifts

Quest BJ-05 : Wheel Balancer Lift

Universal Tire Lift for Wheel Balancers. A must for accurately centering heavy and custom wheels.

Quest COMBO Package 1 : SEMA PROMO

Promotional SEMA Package1) Quest TC790HP-BP Tire Changer1) Quest DSP250 Wheel Balancer

Quest COMBO Package 2 : SEMA PROMO

Promotional SEMA Package1) Quest A750 3-D Alignment System1) Quest 4PA12 4-Post Alignment Lift

Quest DBs9 : 9,000 Low Ceiling 2-Post Lift

9,000 lb. capacity and 9’4” overall column height, Quest DBs 2-post is ideal for low ceiling applications. 3-stage front and 2-stage rear arms provide maximum sweep, arm retraction and reach. A...

Quest Delta 600L : Premium Motorcycle Lift w/ Table

The Quest Delta600L  has all the great features of our DL500 lift with the addition of a side extension kit. The lift has one of the industry's longest (standard) platforms in the industry, 90 inches...

Quest DSP250 : Digital Wheel Balancer

Economical Digital Balancer. Built by Nexion, world leader of automotive equipment, this balancer is designed for low volume and home use applications. Easy to use for power features such as digital...

Quest DSP3200 : Digital 2-D Wheel Balancer

An excellent choice for stepping into commercial grade balancers. This balancer offers the power features you would hope for at a budget friendly price. Built by Nexion, this (made in Italy) wheel...

Quest DSP500HD : Digital Truck Balancer

The Quest DSP500HD is a great economical wheel balancer for HD applications. It handles passenger cars, SUVs, and trucks to make this a single-source solution.Includes: - Basic Truck Adapters- Basic...

Quest GSP3600 : Performance Wheel Balancer w/ LCD Monitor

An excellent choice for a professional commercial grade balancers. This balancer offers the power features of any premier balancer costing thousands more. Built by Nexion, this (made in Italy) wheel...

Quest GSP3800 : Hi-Performance Touch Wheel Balancer

The user-friendly graphic interface, together with the latest touchscreen technology on 22” widescreen monitor simplify and speed-up all operations and program selection.New digital gauge for the...

Quest HP640 : Bead Press System

High performance press system for Quest TC790GT Tire Changers. Multi-press arm makes difficult wheel/tire combinations a breeze by holding down the tire by the demount head, while the...

Quest HP660 : Bead Press System

High performance press system for Quest TC790/889GT Series Tire Changers. (Left Side)Professional press arms features several functions. Including articulating press for holding bead in drop-center...

Quest HP670 : Bead Press (Right Side)

High performance press system for Quest TC785/789/889GT Series Tire Changers. (Right Side)Used for tilt or twist back tire changers. Assists in keep bead properly placed by the demount head. Fixes...

Quest HP690 : Bead Press System

High performance press system for Quest TC785/789GT and VGT Series Tire Changers. (Right Side)Professional press arms features several functions to assist in servicing difficult rim/tire combinations...

Quest Q122 : Pneumatic Tire Spreader

Quest HD Pneumatic Tire SpreaderAutomatic tire spreader provides the easiest way to repair tires. Made of heavy gauge steel. Air operated allows technician to repair tire without strain. Includes...

Quest Q142 : Tire Changer Lift

Wheel Lift for Quest TC Series Tire Changers.This is a great solution to help get heavy tire assemblies safely loaded onto the turn table. Helps prevent damage to costly wheels and keeps your...

Quest RJ6000 : Rolling Bridge Jack

Rolling Bridge Jack for Quest 4P12 Lifts 6,000 Capacity

Quest RJ6000X : Rolling Bridge Jack

Rolling Bridge Jack for Quest RX Lifts 6,000 Capacity

Quest RP11-76-40 : Rim Clamping Jaws (4) Piece Jaw Protector

RP11-76-40 Tire Changer - Rim Clamping Jaws, (4) Piece Jaw Protector, All Models of Cemb, Ranger, Corghi (except Silverline), Coates Models 9070 and 9010, Hunter 505, 515, 575  and TCX Series,...

Quest RP6-710014120 : 3" Wide Tool Mount head

QSP RP6-710014120 Mount/Demount Head for Hunter Leverless Changers ‚  3" wide tool mount head, suitable for Hunter TC37/39, TCA34 tire changers with serial number 664 and above, and Rav Memory G8945

Quest RP6-KIT : Plastic Demount Head Conversion Kit

Converts Quest TC Series, Corghi Service Pro Tire Changers to a polymer demount head. Includes mount and (1) demount head. 

Quest RX550 : Gamma Scissor Lift

Gamma RX550 Premium Scissor Lift Low profile scissor lift with all the power features you would expect. Built by Nexion, the world leader in automotive undercar equipment. Perfect for all types of...

Quest RX77 : Full-Rise Scissor Lift

Quest engineered our 7,700 lb. capacity scissor lift with efficiency and productivity in mind. Our RX77 can easily lift all makes and models (within rated capacity) with a synchronized hydraulic...

Quest RXA550 : Gamma Alignment Scissor Lift w/ PowerLok Plates

Premium low profile scissor alignment lift with all the power features you would expect. Built by Nexion, the world leader in automotive undercar equipment. Perfect for all types of service,...

Quest RXLP88 : 8,800 LB Low Profile Scissor Lift

8,800 LB Ultra Low-Profile Scissor Lift with Power 220v Motor w/ Extendable PlatformQuest engineered our 8,800 lb. capacity mid-rise scissor lift with efficiency and productivity in mind. Our RXLP88...

Quest SD-J7000L : Air Rolling Bridge Jack

Upgrade for most Quest Lifts. This jack is an air-powered jack using a heavy duty air bag. Low profile design with large lifting height. Since does not use hydraulic pump, you can be assured of long...

Quest SDJ7500-PQS : Outrigger Assembly for J7000L Jack (Gamma 550)

Outrigger assembly for J700L jacks for Quest, Rossi, Corghi, and ProQuip Gamma550 Lifts

Quest SP-CHALL4P14EFX : 1/4 Shim Plate for Challenger 4-Post

1/4" Full Sized Steel Shim Plate for Rotary Four-Post Lifts

Quest SP-DB12 : 1/4" Shim Plate for DB12 Lifts

1/4" Full Sized Steel Shim Plate for Quest and Defender DB12 Lifts

Quest SP-DBX10 : 1/4" Shim Plate for DBX10 Lifts

1/4" Full Sized Steel Shim Plate for Quest and Defender DBX10 Lifts

Quest SP-E12 : 1/4" Shim Plate for Challenger E12 Lifts

1/4" Full Sized Steel Shim Plate for Challenger E12 / LE12 Lifts.

Quest SP-I10 : 1/4" Shim Plate for I10 Lifts

1/4" Full Sized Steel Shim Plate for Forward I10 Lifts

Quest SP-I10 : 1/4" Shim Plate for SPO12 Lifts

1/4" Full Sized Steel Shim Plate for Forward I10 Lifts

Quest SP-I12 : 1/4" Shim Plate for I12 Lifts

1/4" Full Sized Steel Shim Plate for Forward I12 Lifts

Quest SP-SPO10 : 1/4" Shim Plate for SPO10 Lifts

1/4" Full Sized Steel Shim Plate for Rotary SPOA and SPO Series Lifts