BendPak QuickJack 5300013 : Urethane Pinch-Weld Blocks - 3" x 3" x 2.5" - SET OF FOUR

Supporting cars on pinch-weld rails creates excessive pressure points which can gouge or tear the standard rubber blocks and damage delicate body rails on unibody vehicles. QuickJack's urethane rubber pinch-weld blocks were engineered with a cross-cut...

BendPak QuickJack 5300011 : Urethane Pinch-Weld Pucks - 3" Diameter - SET OF FOUR

BendPak QuickJack 5210461 : 6000TL Drop-In Rubber Block Trays - Set of 2

Some cars refuse to line up on the first try. If the spread is too narrow for QuickJack's built-in frame trays, the Sport & Compact Drop-In Tray Set gives you the flexibility you need.Each tray rests securely inside the frame and creates a stable...

BendPak QuickJack 5210462 : 6000ELX-8000TL Drop-In Rubber Block Trays - Set of 2

Trucks and SUVs bring their own challenges. Wider stances, longer wheelbases, and lift points that do not always cooperate. The Truck & SUV Drop-In Tray Set gives your QuickJack the placement flexibility to match.The trays nest securely on the inner...

BendPak QuickJack 5585447 : Alternate Power Unit Kit - AC 110-Volt (Includes Male Quick-Connect Fittings)

BendPak QuickJack 5585448 : Alternate Power Unit Kit - AC 208-230-Volt (Includes Male Quick-Connect Fittings)

BendPak QuickJack 5325768 : Dust Caps For Flush-Face Quick-Coupler Fittings - Male-Female - Set of 8

QuickJack hydraulic dust caps are tailor-made to securely fit to all leader and hydraulic hose fittings in the car lift assembly kit. Designed from a robust polymer that is non-erosive and abrasion-resistant, as well as tight-fitting in order to prevent...

BendPak QuickJack 5210259 : Urethane Wheels - Set of 4

The urethane construction is less rigid than comparable materials, better absorbing ground impact for a smoother ride. This makes rolling the QuickJack frames easier and more efficient than ever before.• Produces much less noise on hard surfaces compared...

BendPak QuickJack 5570216 : Long Hydraulic Hose for QuickJack - Ea.

Each long hose connects to a quick-coupler fitting on the short leader hose (attached to the frame) by way of a male fitting on the power unit. Quick-coupler fittings sold separately.Protects against damage from pinching and high pressures 

BendPak QuickJack 5570202 : Short Hydraulic Hose for QuickJack - Ea.

BendPak QuickJack 5550033 : Flush-Face Quick-Coupler Fittings - Male & Female - Set of 2

BendPak QuickJack 5210260 : Straight Inflation Valve Stem Schrader Valve - Includes Valve core - Set of 2

An aluminum Schrader valve fits directly to the car lift air cylinder, so activating an air compressor or pumping to 50 psi is fast and safe. Sold in sets of 2. 

BendPak APEX AR-335-54-TR : 36" Lightweight Foam Trailer Ramp Kit - 3.5" Height - 5.4° Approach Angle - Set of 2

AR-335-54-TR / 36" Lightweight Foam Trailer Ramp Kit / 3.5” Height / 5.4° Approach Angle / Set of 2APEX 36” Lightweight Foam Trailer Ramp Kit makes loading low cars onto trailers predictable instead of stressful. Each 36 inch ramp reduces the approach...

BendPak APEX AR-450-58-TR : 48" Lightweight Foam Trailer Ramp Kit - 5" Height - 5.9° Approach Angle - Set of 2

AR-450-58-TR / 48" Lightweight Foam Trailer Ramp Kit / 5” Height / 5.9° Approach Angle / Set of 2The 48" Lightweight Foam Trailer Ramp Kit from APEX is built for low cars that need extra clearance and a bit more lift. Each 48 inch ramp raises the trailer...

BendPak APEX AR-570-66-TR : 60" Lightweight Foam Trailer Ramp Kit - 7" Height - 6.6° Approach Angle - Set of 2

AR-570-66-TR / 60" Lightweight Foam Trailer Ramp Kit / 7” Height / 6.6° Approach Angle / Set of 2The 60” Lightweight Foam Trailer Ramp Kit from APEX is built for seriously low cars that need real clearance and a longer, smoother transition onto the...

BendPak APEX AR-670-55-TR : 72" Lightweight Foam Trailer Ramp Kit - 7" Height - 5.5° Approach Angle - Set of 2

AR-670-55-TR / 72" Lightweight Foam Trailer Ramp Kit / 7” Height / 5.5° Approach Angle / Set of 2The 72" Lightweight Foam Trailer Ramp Kit from APEX is built for low cars, long trailers, and people who are done gambling with ground clearance. Each ramp...

BendPak APEX AR-340-95-GR : 36" Lightweight Foam Garage Ramp Kit - 4" Lift - 9.35° Approach Angle - Set of 2

AR-340-95-GR / 36" Lightweight Foam Garage Ramp Kit / 4" Lift / 9.35° Approach Angle / Set of 2The 36" Lightweight Foam Garage Ramp Kit from APEX is the clean, no nonsense way to get low cars up in the air for real work in a standard garage. Each 36 inch...

BendPak APEX AR-460-95-GR : 48" Lightweight Foam Garage Ramp Kit - 6" Lift - 9.5° Approach Angle - Set of 2

 AR-460-95-GR / 48" Lightweight Foam Garage Ramp Kit / 6” Lift / 9.5° Approach Angle / Set of 2The 48" Lightweight Foam Garage Ramp Kit from APEX gives low cars serious working room without needing a full lift. Each 48 inch ramp delivers 6 inches of...

BendPak APEX AR-580-95-GR : 60" Lightweight Foam Garage Ramp Kit - 8" Lift - 9.5° Approach Angle - Set of 2

AR-580-95-GR / 60" Lightweight Foam Garage Ramp Kit / 8" Lift / 9.5° Approach Angle / Set of 2The 60" Lightweight Foam Garage Ramp Kit from APEX is built for enthusiasts who actually spend time under their cars. Each 60 inch ramp gives you 8 inches of...

BendPak APEX AR-610-95-GR : 72" Lightweight Foam Garage Ramp Kit - 10" Lift - 9.5° Approach Angle - Set of 2

AR-610-95-GR / 72" Lightweight Foam Garage Ramp Kit / 10" Lift / 9.5° Approach Angle / Set of 2The 72" Lightweight Foam Garage Ramp Kit from APEX is for people who want true undercar access without installing a full lift. Each 72 inch ramp delivers 10...

BendPak APEX AR-911-6-LR : 96" Lightweight Foam 4-Post Ramp Kit - 11" Lift - 6° Approach Angle - Set of 2

AR-911-6-LR / 96" Lightweight Foam 4-Post Ramp Kit / 11" Lift / 6° Approach Angle / Set of 2The 96" Lightweight Foam 4-Post Ramp Kit from APEX is the ultra light, hook nose upgrade made specifically for BendPak HD-973P and HD-973PX lifts. Each 96 inch...

BendPak APEX AR-45-57-LR : 48" Lightweight Foam 4-Post Ramp Kit - 5" Lift - 5.7° Approach Angle - Set of 2

AR-45-57-LR / 48" Lightweight Foam 4 Post Ramp Kit / 5" Lift / 5.7° Approach Angle / Set of 2The 48" Lightweight Foam 4 Post Ramp Kit from APEX is the ultra convenient, hook nose replacement for the heavy steel or aluminum ramps that came with your four...

BendPak APEX AR-2437-9-TS RAMP Kit 4 : Tire Saver Ramp Kit

AR-2437-9-TS / Lightweight Foam Tire-Saver Ramp Kit / 1.5" Lift / 9° Approach Angle / Set of 4Lightweight Foam Tire-Saver Ramp Kit from APEX is built to keep your tires round, healthy, and off cold concrete during storage. Each ramp is part of a modular...

BendPak APEX 5602190 : Ramp Receiver Bracket – Fits BendPak 7K thru 9K Four Post Lifts, incl. 973 Series - Set of 2

Required for Using APEX Hook-Nose Lift Ramps / Fits BendPak 7K and 9K Four Post Lifts, Including 973 Series / Set of 2Ramp Receivers are required for using APEX hook-nose lift ramps on most BendPak 7K–9K four-post lifts. These heavy-duty steel brackets...

BendPak APEX AL10C : 2-Post Lift - 10,000 Lb. Cap. - Clearfloor, 220V 1Ph

The APEX AL10C is a 10,000-lb clearfloor two-post lift engineered for shops that demand unrestricted under-vehicle access, heavy-duty strength, and long-term reliability. Featuring a direct-drive hydraulic lifting system, rugged overhead box-beam...

BendPak APEX AL10C-CSA : 2-Post Lift - 10,000 Lb. Cap. - Clearfloor - Incl. CSA (or Equivalent) Power Unit, 220V 1Ph

BendPak APEX AL-10CS : 2-Post Lift - 10,000 Lb. Cap. - Single-Point Safety - Clearfloor, 220V 1Ph

BendPak APEX 5210573 : 2-Post Frame Cradle Pad - 50mm Pin - Set of 4

2-Post Frame Cradle Pad / 50mm Pin / Set of 4Heavy-duty frame cradle pads designed to provide enhanced vehicle frame contact and stability during lifting. Compatible with APEX two-post lifts using 50mm pin receivers.APEX Frame Cradle Pad / 50mm Pin / Set...

BendPak APEX 5210535 : 2-Post Stacking Truck-Van Adapter - 125mm - 50mm Pin - Set of 4

The APEX Tall Adapter Set increases lifting pad height to accommodate trucks, SUVs, lifted vehicles, and vehicles with recessed lifting points. Featuring rugged steel construction and 50mm pin compatibility, these adapters install quickly into compatible...

BendPak APEX 5210536 : 2-Post Stacking Truck-Van Adapter - 63mm - 50mm Pin - Set of 4

2-Post Stacking Truck/Van Adapter / 63mm / 50mm Pin / Set of 4Medium-height lift adapters for improved vehicle reach and enhanced lift point flexibility on compatible APEX two-post lifts.The APEX Medium Adapter Set provides additional lift pad height to...

BendPak APEX 5216333 : 2-Post Telescoping Screw Pad - 50mm Pin - Incl. Polyurethane Tuf-Pad - Ea.

2-Post Telescoping Screw Pad / 50mm Pin / Incl. Polyurethane Tuf-Pad / Ea.Replacement screw pad assembly for APEX two-post lifts featuring adjustable height and secure 50mm pin compatibility. 

BendPak APEX 5210511 : Replacement Polyurethane Two-Post Lift Pad - GP Series - Slip Over - Set of 4

Replacement Polyurethane Two-Post Lift Pad / GP Series / Slip Over / Set of 4Round replacement lift pads designed to restore grip, protection, and lifting performance on compatible APEX two-post lifts.

BendPak APEX 5210512 : Arm Topper Lift Pad - Fits Long Arms - GP Series - Set of 4

Arm Topper Lift Pad / Fits Long Arms / GP Series / Set of 4Replacement arm pads designed to restore proper vehicle protection and contact performance on APEX lift arms.

BendPak APEX 5140350 : AT26A Swing Arm Tire Changer - 12"-24" Rim Capacity - With Assist Tower - 110V-220V, 50/60HZ, 1-Ph.

AT26A Swing Arm Tire Changer / 12-24 Inch Rim Capacity / With Assist Tower / 110V or 220VThe APEX AT26A is a performance-driven swing arm tire changer built for growing shops and serious garages that demand commercial capability without commercial-grade...

BendPak APEX 5140351 : AT26 Swing Arm Tire Changer - 12"-24" Rim Capacity - 110V-220V, 50/60HZ, 1-Ph.

AT26 Swing Arm Tire Changer / 12-24 Inch Rim Capacity / 110V or 220VThe APEX AT26 is a high-performance swing arm tire changer designed for growing shops and serious garages that want commercial-grade capability without paying for features they do not...

BendPak APEX : AB28 Wheel Balancer - 110V-220V, 50/60HZ, 1-Ph

Digital Wheel Balancer / Passenger, Light Truck, and Performance Wheels / 110V or 220VThe APEX AB28 is a commercial-accuracy digital wheel balancer built for growing shops that need fast, repeatable balance results without unnecessary complexity...

BendPak APEX : AB24M Post Mount Wheel Balancer - Manual Spin - 110V-220V, 50/60HZ, 1-Ph.

BendPak APEX 5140345 : COMBO - AT26A Swing Arm Tire Changer & AB24M Wheel Balancer - 110V-220V, 50/60HZ, 1-Ph.

BendPak APEX 5140346 : COMBO - AT26 Swing Arm Tire Changer & AB24M Wheel Balancer - 110V-220V, 50/60HZ, 1-Ph.

BendPak APEX 5140921 : COMBO - AT26 Swing Arm Tire Changer & AB28 Wheel Balancer - 110V-220V, 50/60HZ, 1-Ph.

The APEX AT26 and AB28 combo delivers a complete tire changing and wheel balancing solution built for growing shops that want professional capability at a smart value. Pairing a rugged swing arm tire changer with a commercial-accuracy digital wheel...

BendPak APEX 5140920 : COMBO - AT26A Swing Arm Tire Changer & AB28 Wheel Balancer - 110V-220V, 50/60HZ, 1-Ph.

AT26A Swing Arm Arm Tire Changer and AB28 Wheel Balancer Combo / 110V or 220VThe APEX AT26A and AB28 combo delivers a complete, performance-driven tire changing and wheel balancing solution for growing shops and serious garages. Pairing a swing arm tire...

BendPak APEX 5328501 : Mounting Stand for AB24M - Incl. Mounting Hardware

Graco 239949 : Nozzle Extension Kit - Oil/Antifreeze (Rigid)

Automatic, thermally compensating

Karcher 1.109-154.0 : Mojave Series Pressure Washer - HDS 3.5/30 Eg

The Kärcher Mojave series is the perfect all-around machine for a variety of applications and target groups, including agriculture, auto­motive and transportation industries. The machines deliver the high­est performance for best cleaning results - all...

Autostacker MPU / STD. : Master Power Unit - Powers Up to 12 Lifts - 5HP, 208- 240V, 50/60HZ, 1- Phase (OPT2 AND OPT3 Models Only)

Autostacker MPU / HIGH- SPEED : High- Speed MPU - Powers Up to 12 Lifts - 10HP, 208- 230/460V, 50/60HZ, 3- Phase (OPT2 AND OPT3 Models Only)

Autostacker MPU Shed : Stainless Steel MPU Housing Unit - Fits Both 5585007 and 5585507

Autostacker A6S EXT48 Ramps : A6S Extended Aluminum 48" Approach Ramps

Upgrade your Autostacker lift with 48" Low- Profile Aluminum Ramps for smooth, easy loading of low- clearance vehicles—lightweight, heavy- duty design prevents scraping and undercarriage damage with superior tire grip on a gentler incline

Autostacker 5210195 : A6S Removable Access Panel - One Assembly - Replaces Three Galvanized Ramp Sections

Autostacker 5210198 : A6W Removable Access Panel - One Assembly - Replaces Three Galvanized Ramp Sections

BendPak : OctaFlex - 12000 Capacity - Clearfloor - 2-Post Lift

Two-Post Service Lift / 12,000-Lb. Capacity / 6,000-Lb. Auxiliary Lift-Assist SystemThe BendPak OctaFlex 12DPS is a next- generation 12,000- lb two- post service lift with eight fully adjustable lifting arms designed to handle modern vehicle service...

BendPak : 16AP - 16,000 Capacity - Clearfloor - Super-Duty - 2-Post Lift

Two Post Car Lift 16,000-lbs. Capacity / Adaptable Clearfloor / High-Rise / 168" O.A. HeightThe 16AP two-post lift delivers exceptional direct-drive lifting performance. Equipped with cutting-edge technology, top-of-the-line materials, and a design...