Karcher 9.801-040.0 : 10-Inch Natural Gas-Fired Draft Diverter for Model 9452 Stationary Hot Water Generator

10-Inch Draft Diverter: Manufacturer-designated 10-inch draft diverter for the specified Kärcher natural gas-fired heating module.

Natural Gas-Fired Application: Designed for use with the Model 9452 natural gas heating configuration.

Model 9452 Compatibility: Specifically listed for the Karcher Model 9452 Stationary Hot Water Generator.

Karcher 9400 Series Accessory: Included in Kärcher's professional 9400 Series heating module accessory range.

Dedicated Venting Component: Intended to form part of the manufacturer's approved combustion exhaust venting arrangement.

Draft Regulation Function: A draft diverter helps accommodate variations in chimney or vent draft when incorporated into a properly designed gas appliance venting system.

Combustion Exhaust Management: Supports the venting system used to discharge combustion products from the compatible gas-fired heating module.

Field-Installed Accessory: Listed by Kärcher among optional field-installed accessories for the 9400 Series heating modules.

Stationary Hot Water Generator Integration: Designed for the specified stationary heating module rather than a portable pressure washer or standalone gas heater.

Natural Gas Burner Application: Intended for an approved natural gas burner installation on the compatible Model 9452.

Commercial Hot Water Cleaning Systems: Supports heating module installations used in commercial pressure washing applications.

Industrial Cleaning Equipment Applications: Relevant to properly configured hot water cleaning systems used in maintenance facilities, equipment washing areas, and industrial environments.

Model-Specific Equipment Compatibility: Developed for the Model 9452 rather than universal installation on all Kärcher hot water generators.

540,000 BTU/hr Heating Module Application: The compatible Model 9452 has a manufacturer-listed natural gas heating capacity of 540,000 BTU/hr. This is the heating module's rating, not a separate rating for the draft diverter.

10 GPM Heating System Application: The Model 9452 stationary heating module supports a maximum rated water flow of 10 gallons per minute.

3,200 PSI Base Equipment Rating: The compatible Model 9452 heating module is rated for pressure washer systems operating up to 3,200 PSI.

Professional Venting Installation: Intended to be installed according to the heating module manufacturer's instructions and applicable fuel-gas and venting requirements.

Commercial Equipment Configuration: Provides a manufacturer-specified accessory option for compatible stationary hot water heating installations.

Separate Model 9462 Draft Diverter: Kärcher lists part number 8.717-730.0 as the 12-inch natural gas-fired draft diverter for Model 9462.

Separate Power Dampener Option: Kärcher offers 8.749-806.0 as a separately listed 10-inch power dampener accessory.

Additional Heating Module Accessories: The Kärcher 9400 Series also includes optional fuel conversion components, power dampeners, and related accessories.

Accurate Part Identification: Identified as Karcher 9.801-040.0 for ordering and equipment-specific accessory selection.

Professional Equipment Maintenance: Provides a manufacturer-listed component for approved installation, replacement, or servicing of the applicable gas-fired heating system.

Installation Compatibility Requirements: Confirm vent dimensions, venting design, local code requirements, and heating module configuration before installation.

Product: Natural Gas-Fired Draft Diverter

Part Number: 9.801-040.0

Nominal Size: 10 inches

Compatible Heating Module: Model 9452

Heating Module Part Number: 1.103-906.0

Product Series: Kärcher 9400 Series

Accessory Type: Optional, field-installed venting component

Construction material and finish

Overall dimensions and weight

Exact vent connection geometry

Included mounting hardware

Approved chimney and venting configurations