Karcher 8.717-730.0 : 12-Inch Natural Gas-Fired Draft Diverter for Model 9462 Stationary Hot Water Generator

Product Description

Key Product Features:

- 12-Inch Draft Diverter: Manufacturer-designated 12-inch draft diverter for the Kärcher Model 9462 natural gas-fired heating module.

- Natural Gas-Fired Application: Specifically listed for natural gas heating systems rather than universal use with all burner fuel types.

- Dedicated Model 9462 Compatibility: Designed for the Karcher Model 9462 Stationary Hot Water Generator, equipment part number 1.103-908.0.

- Karcher 9400 Series Accessory: Featured within Kärcher's professional 9400 Series stationary hot water generator accessory range.

- Field-Installed Accessory: Listed as an optional field-installed component, allowing installation on compatible equipment according to manufacturer requirements.

- Combustion Exhaust Venting Support: Intended for use as part of the approved exhaust venting arrangement of the designated natural gas-fired heating module.

- Draft Management Function: Draft diverters are used in appropriately designed gas appliance venting systems to accommodate variations in chimney or exhaust draft.

- Gas Burner Venting Integration: Supports the intended exhaust system configuration for the natural gas-fired Model 9462 heating module.

- Stationary Heating Module Application: Designed for installation with a compatible stationary hot water generator rather than a portable pressure washer.

- Industrial Hot Water Cleaning Systems: Suitable for correctly configured heating installations used in industrial equipment cleaning and commercial pressure washing.

- Commercial Cleaning Equipment Applications: Relevant to hot water pressure washing systems used in fleet maintenance facilities, equipment wash bays, and commercial cleaning operations.

- Model-Specific Venting Component: Provides a manufacturer-listed accessory for the Model 9462 rather than a universal venting solution.

- 920,000 BTU/hr Heating Module Application: The compatible Model 9462 natural gas-fired heating module has a published heating capacity of 920,000 BTU per hour. This is the heating module's rating, not an independently established capacity rating for the diverter.

- 10 GPM Heating Module Compatibility: The Model 9462 is rated for water flow up to 10 gallons per minute, subject to the complete pressure washing system's operating conditions.

- 3,200 PSI Base Equipment Rating: Designed for a heating module with a manufacturer-listed maximum operating pressure of 3,200 PSI.

- 115V Single-Phase Heating Module: The compatible Model 9462 uses a 115V single-phase electrical configuration. The draft diverter itself is not identified as an electrically powered accessory.

- Natural Gas Burner Integration: Intended for the standard natural gas-fired Model 9462 configuration.

- High-Capacity Hot Water Generator Application: Supports an accessory configuration for Kärcher's larger 9462 heating module within the 9400 Series.

- Commercial Facility Maintenance: Relevant to approved hot water cleaning installations in workshops, warehouses, maintenance departments, and industrial facilities.

- Professional Exhaust System Design: Must be incorporated into a venting arrangement that meets the appliance manufacturer's requirements and applicable gas safety codes.

- Separate Model 9452 Draft Diverter: Kärcher lists 9.801-040.0 as the 10-inch natural gas-fired draft diverter for the smaller Model 9452.

- Separate 12-Inch Power Dampener: Kärcher offers 8.753-171.0 as a separately listed 12-inch power dampener accessory.

- Optional Power Dampener Wiring Harness: Kärcher lists 8.749-807.0 as an accessory for compatible power dampener installations.

- Optional Fuel Conversion: Kärcher identifies 8.903-075.0 as the factory-installed natural gas-to-LP conversion for Model 9462. The draft diverter's compatibility with an LP-converted unit must be confirmed separately.

- Not a Complete Heating Module: This product is an exhaust venting accessory, not a complete water heater, burner, or stationary hot water generator.

- Manufacturer Part Number Identification: Identified as Karcher 8.717-730.0 for accurate accessory selection, equipment maintenance, and ordering.

- Professional Replacement Application: Provides a specified component for approved servicing or installation of the Model 9462 heating system.

- Qualified Installation Required: The component must be installed according to Kärcher's instructions and applicable fuel-gas, combustion-air, and exhaust-venting standards.

Important Compatibility Note: The Karcher 8.717-730.0 is a 12-inch natural gas-fired draft diverter specifically listed for the Model 9462 Stationary Hot Water Generator.

Manufacturer-confirmed information includes:

The compatible Model 9462 heating module is rated for 920,000 BTU/hr, 10 GPM, and 3,200 PSI. These specifications describe the heating module, not the individual draft diverter.

Kärcher

The following product-specific details were not independently confirmed:

Important: This draft diverter should not be confused with the 10-inch Model 9452 draft diverter (9.801-040.0) or the 12-inch power dampener (8.753-171.0). These are separately listed accessories with different intended functions.

Installation and Safety Note: Improper exhaust venting can lead to combustion problems, fire hazards, and carbon monoxide exposure. Installation should be performed by qualified personnel following Kärcher's equipment instructions, applicable fuel-gas codes, and local venting requirements.

Why Buy from ProQuip Solutions:

Choose ProQuip Solutions for the Karcher 8.717-730.0 12-Inch Natural Gas-Fired Draft Diverter and professional heating module accessories. Explore stationary hot water generators, draft diverters, power dampeners, venting components, and commercial pressure washing equipment designed to support properly configured heating systems and efficient industrial cleaning operations at www.proquip.solutions.