MotorVac 500-1125B: Transtech IV

Product Description

Key Product Features:

• Two transmission exchange methods: Combines inline cooler-line and dipstick-tube fluid exchange capabilities in one cabinet.
• Automatic inline ATF exchange: Connect the machine to a transmission cooler line, select the service, and start the automatic exchange process.
• One-to-one fluid replacement: Directs used ATF into the waste tank while returning a corresponding amount of new fluid to the transmission.
• Walk-away convenience: Automatic inline operation minimizes technician involvement after the service has been started.
• Dipstick-tube exchange mode: Performs transmission fluid exchanges through the vehicle’s dipstick tube when cooler-line connections are inconvenient or unavailable.
• No adapters required for dipstick service: The dipstick exchange method provides convenient access without disconnecting transmission cooler lines or installing vehicle-specific adapters.
• Expanded vehicle coverage: Dual exchange capability helps shops service vehicles with conventional cooler-line access as well as models better suited to dipstick extraction.
• Patented Level Synchronization: Helps maintain the proper transmission fluid level and prevents the system from becoming overfilled or underfilled during exchange.
• Automatic bypass protection: Maintains transmission-fluid circulation and prevents the vehicle from running out of fluid when the exchange is completed or interrupted.
• Drain Pan function: Removes fluid from the transmission pan before filter replacement, helping technicians complete the procedure with less mess.
• Transmission cooler flush function: Allows technicians to flush the transmission cooler and cooler lines to help remove contaminated fluid and trapped debris.
• High-volume fluid pump: Delivers rapid new-fluid transfer for efficient transmission service and improved shop productivity.
• High-volume waste evacuation: A dedicated waste-fluid pump and drain hose help empty collected ATF quickly after service.
• 26-quart new-fluid reservoir: Accommodates large transmission capacities and supports complete exchanges on many passenger cars, SUVs, vans, and light trucks.
• 26-quart waste tank: Provides dedicated storage for used transmission fluid collected during the exchange.
• Suitable for filter replacement services: The machine can drain the transmission before pan removal and then refill or exchange the fluid after a new filter is installed.
• Fluid-type change capability: Operating procedures allow technicians to empty the new-fluid system when switching between different ATF specifications.
• Pressure monitoring: The control panel includes a pressure gauge that indicates transmission fluid circulation during inline operation.
• Clear operating controls: Mode selection, start, resume, drain, and fill controls simplify transmission service setup and operation.
• Audible low-fluid warning: Alerts the operator when the machine detects an insufficient new-fluid supply.
• Visual status indicators: Control-panel lights communicate fluid conditions, operating modes, and service progress.
• Automatic service completion: The system completes the selected inline exchange and enters bypass mode without requiring continuous technician supervision.
• 12V DC operation: Draws power from the serviced vehicle, eliminating the need for a nearby AC electrical outlet.
• 8-amp input rating: The current official CPS specification lists machine input at 12V DC and 8 amps.
• 10-foot power cord: Provides convenient access to the vehicle battery while allowing flexible machine placement.
• 10-foot service hoses: Offer adequate reach for connecting the machine while it remains safely positioned beside the vehicle.
• Adapter compatibility: Cooler-line operation supports MotorVac transmission adapter kits for expanding coverage across North American, Asian, and European vehicles.
• Space-saving two-in-one design: Combining two exchange methods in one machine reduces workshop congestion and equipment investment.
• Mobile workshop cabinet: The upright rolling design makes the unit easy to move between vehicle lifts and service bays.
• Machine dimensions: Approximately 39 inches high, 21 inches wide, and 17 inches deep.
• Shipping weight: Approximately 90 pounds.
• One-year manufacturer warranty: Covered by MotorVac’s one-year equipment warranty.
• Manufacturer part number: 500-1125B.
• Professional applications: Ideal for automotive dealerships, transmission repair facilities, independent garages, fleet service departments, quick-lube centers, and technical training programs.

Why Buy from ProQuip Solutions:

Purchase the MotorVac 500-1125B TransTech IV+ from ProQuip Solutions for a versatile transmission service system capable of handling both cooler-line and dipstick-tube ATF exchanges. ProQuip Solutions can assist with compatible adapter kits, transmission service chemicals, replacement hoses, filters, fittings, and maintenance parts, helping your facility expand vehicle coverage, maintain accurate fluid levels, reduce service time, and deliver consistent transmission maintenance.