Truck Board

SPC 23102: 1/2° FORD CAM/CAS SLEEVE

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23104: 1° FORD CAM/CAS SLEEVE

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23106: 1-1/2° FORD CAM/CAS SLEEVE

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23108: 2° FORD CAM/CAS SLEEVE

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23109: 0° FORD CAM/CAS SLEEVE

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23132: 1/2° 4X4 CAM/CAS SLV

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23136: 1-1/2° 4X4 CAM/CAS SLV

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23139: 0° 4X4 CAM/CAS SLEEVE

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC 23182: 1/2° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove...

SPC 23186: 1-1/2° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove...

SPC 23188: 2° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove...

SPC 23190: 2-1/2° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove...

SPC 23212: 2-1/2° FORD SLEEVE

Correct front caster and camber ±2.50° on medium duty Ford trucks.   Adjustment range: Cam/Cas ±2.50°Installation time: .5 hr/sideRequired: 1 per wheel

SPC 23222: 1/2° FORD SLEEVE

Correct front caster and camber ±.50° on medium duty Ford trucks.   Adjustment range: Cam/Cas ±.50°Installation time: .5 hr/sideRequired: 1 per wheel

SPC 23224: 1° FORD SLEEVE

Correct front caster and camber ±1.0° on medium duty Ford trucks.   Adjustment range: Cam/Cas ±1.0°Installation time: .5 hr/sideRequired: 1 per wheel

SPC 23228: 2° FORD SLEEVE

Correct front caster and camber ±2.0° on medium duty Ford trucks.   Adjustment range: Cam/Cas ±2.0°Installation time: .5 hr/sideRequired: 1 per wheel

SPC 23236: 1-1/2° FORD SLEEVE

SPC 23236: 1-1/2° FORD SLEEVE   SKU: 23236   This truck sleeve will correct caster and camber ±1.50° on trucks equipped with the Dana Super 60 solid axle, such as the F450, F550 and GM Topkick. Other sleeve sizes are also available, see below...

SPC 24130: ADJUSTABLE TRUCK SLEEVE

Inventory getting out of hand? Just need to fill in a few odd sizes? An Adjustable Sleeve may be just what you need. This sleeve can adjust camber and/or caster in a large variety of combinations. A great solution for saving money and keeping sales...

SPC 24180: ADJUSTABLE TRUCK SLEEVE

Inventory getting out of hand? Just need to fill in a few odd sizes? An Adjustable Sleeve may be just what you need. This sleeve can adjust camber and/or caster in a large variety of combinations. A great solution for saving money and keeping sales...

SPC 24220: ADJUSTABLE TRUCK SLEEVE

This adjustable truck sleeve offers ± 2.50° of camber and caster for the 2005 and up F250, F350 Super Duty. Reduce inventory and avoid missed sales by carrying one part.   Adjustment range: Cam./Cas. ± 2.50°Installation time: .5 hr/sideRequired: 1 per...

SPC 74400: 1-1/2" OPEN END WRENCH

These wrenches make presetting the new adjustable truck sleeves, 24120, 24130, 24160, 24180, easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the sleeve body. 1-1/2"...