Emax APP4V1043TR2 : 10 HP 43 CFM Displacement 2 Stage Reciprocating Bare Pump

Name: Emax APP4V1043TR2 : 10 HP 43 CFM Displacement 2 Stage Reciprocating Bare Pump
Brand: Emax
SKU: APP4V1043TR2
Price: 1388 USD
Availability: InStock

Emax

$1,388.00

Write a Review

SKU:: APP4V1043TR2
Shipping:: Free Shipping
Voltage:: 208V
Voltage:: 230V
HP:: 10 HP
CFM:: 41-50

Product Description

EMAX APP4V1043TR2 10HP 43CFM Displacement 2 Stage Reciprocating Splash Lubricated Bare Pump w/ flywheel

This Emax 10 HP, 4 Cylinder, 2-Stage, air compressor pump has 43 CFM Displacement, 34 CFM @ 175 PSI, and 38 CFM @ 100 PSI. This unit has an SCFM @ 175 of 34. This is usable air or “free air” at pressure – 175 PSI. This pump can go to 200 PSI, but what we tell all our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed. This will give you a higher CFM at a lower pressure and the compressor will run cooler with less compressor wear. This is true with any compressor on the market. Lower pressure combined with lower RPM will give you great results and a compressor that will last for many years. We have this style compressor, 4 Cylinder, in factories, body shops, and many tough applications that we sold over 20 years ago.

This pump is ALL CAST IRON, (not aluminum). It has solid cast iron cylinder, cylinder heads, crankcase, flywheel, crank, and forged steel connecting rods – not aluminum! These rods also have a replaceable bearing on the crank journal and on the wrist pin journal. This is what most of the competition do not have.

This pump has large Timken-Style roller bearing on the crank ends on each end of the crankshaft. This ensures good crank stability and long compressor bearing life. Each cylinder is all cast iron with no sleeves or aluminum. All cast iron prevents cylinder distortion and egg-shaped cylinders when pump gets hot. This pump has 2 B-Section belt drive. Twin belt ensures better belt gripage and longer belt life. This pump has head unloaders. This is very nice for continuous run applications such as gasoline driven or electric driven high duty cycle applications. Head unloaders are an air cylinder in each head. When air is applied to them, they open or push the intake valves open allowing the pump to go into a free wheel mode. The cylinders are still moving in a free wheel mode, but it cannot compress the air because the intake valve is held open. This pulls cool air into the cylinder. The cool air absorbs the heat in the pump and blows it back out the intake valve. This is nice when you are sandblasting, etc., under heavy duty cycles. This pump has a site glass to view your oil level.

Features:

Solid cast iron 2-stage V-4 piston series pump, oil lubricated design to extend pump life, rated at up to 50,000 hours (based on B-10 bearing life rating)
Ram-Tek – solid steel, heavy gauge rods, designed for maximum performance and durability
Cool-Tek – the coolest running compressors in the industry, air stream technology provides 35% lower operating temperature, reduces moisture build up and extends pump life
Flow-Tek – concentric disc valves, deliver maximum air flow and reliability with low replacement costs, easily accessible design provides easy maintenance and durability
Industrial grade ball bearing for maximum performance and extended pump life
Built-in head unloaders designed for continuous run applications
flywheel included on pump

Specifications
Specifications

Specifications

CFM @ 100 PSI	38
Compressor Stage	Two
Horse Power	10
Pump Material	Solid Cast Iron
Pump Model	APP4V1043T
Dimensions LxWxH	28" X 21" X 20.5"
Product Weight	350
Bolt Pattern	9.25" x 9.25
Oil Capacity	2 Quarts

Specifications

Voltage 208V

Voltage 230V

HP 10 HP

CFM 41-50