American Forge & Foundry

AFF 41055 : 1" Dr 100-700 Ft/Lbs Ratcheting Torque Wrench

Perceptible jolt and audible click indicate desired torque setting has been reachedLocking collar prevents accidental setting adjustmentPliable handle grip for superior comfort and oil...

AFF 3052 : 1,100 Lbs Manual Telescoping Transmission Jack

Two stage telescopic ram designed for medium duty transmissions, transfer cases, and differentialsDouble pump hydraulic system for quick lift operationPowder coat finish provides resistance to...

AFF 3305A : 5 Ton Pin-Type Jack Stands (Pair)

AFF 3305A  5 Ton Pin-Type Jack Stands (Pair)Pin type posts adjust to four height positions (13” to 17”)Extra-large 2.75”x4” support saddlesHeavy duty 9”x10” base secures loadShip weight 29 lbs per...

AFF 837 : 50 Ton Shop Press

SHOP PRESS 50 TON   Heavy-Duty vehicle and industrial use Winch-operated press bed with seven adjustment levels Comes with 2 pressing plates Two-speed hand pump provides faster travel to load...

AFF 862ASD : 150 Ton Super Duty Shop Press

AFF 862ASD: 75 Ton Super Duty Shop Press   SKU: 862ASD   Fully welded construction for exceptional strength and durability 7 position bed height configuration for ultimate operator...

AFF 3198 : Fuel Tank Adapter

FUEL TANK ADAPTER Converts AFF Model 3190B, 3192A and 2195A transmission jacks to remove and install fuel tanks.   4" x 5-3/4" diameter saddles adjust from 19-3/4" to 31-3/4". Includes two...

AFF 40301 : 3/4" Dr 1-1/4" Torque Stick 250 FT/LBS

AFF 40301 3/4" Dr 1-1/4" Torque Stick 250 FT/LBSReduces the risk of overtightening wheel lug nutsHelps prevent damage to wheels, studs and brake rotors that can result from inaccurate torqueSocket...

AFF 40309 : 3/4Dr 475Ft/Lb Torque Ext

AFF 40309 3/4" Drive 475 Ft/Lb Torque Limiting ExtensionReduces the risk of overtightening wheel lug nutsHelps prevent damage to wheels, studs and brake rotors that can result from inaccurate...

AFF 40308 : 3/4Dr 350Ft/Lb Torque Ext

AFF 40308 3/4" DrIVE 350 Ft/Lb Torque Limiting ExtensionReduces the risk of overtightening wheel lug nutsHelps prevent damage to wheels, studs and brake rotors that can result from inaccurate...

AFF 40307 : 3/4Dr 250Ft/Lb Torque Ext

AFF 40307 3/4" Drive 250 Ft/Lb Torque Limiting ExtensionReduces the risk of overtightening wheel lug nutsHelps prevent damage to wheels, studs and brake rotors that can result from inaccurate...

AFF 859ASD : 100 Ton Super Duty Shop Press

100 TON SUPER DUTY SHOP PRESS   Shatter resistant polycarbonate protector shield provides maximum protection against shrapnel and other debris Welded construction for exceptional strength and...

AFF 856ASD : 75 Ton Super Duty Shop Press

75 TON SUPER DUTY SHOP PRESS   Shatter resistant polycarbonate protector shield provides maximum protection against shrapnel and other debris Welded construction for exceptional strength and...

AFF 854ASD : 50 Ton Super Duty Shop Press

50 TON SUPER DUTY SHOP PRESS   Shatter resistant polycarbonate protector shield provides maximum protection against shrapnel and other debris Welded construction for exceptional strength and...

AFF 852ASD : 30 Ton Super Duty Shop Press

30 TON SUPER DUTY SHOP PRESS    SKU: 852ASD    Shatter resistant polycarbonate protector shield provides maximum protection against shrapnel and other debris Welded construction for exceptional...

AFF 850ASD : 20 Ton Super Duty Shop Press

20 TON SUPER DUTY SHOP PRESS    SKU: 850ASD    Shatter resistant polycarbonate protector shield provides maximum protection against shrapnel and other debris Welded construction for...

AFF 834 : 35 Ton Shop Press 35 Ton

SHOP PRESS 35 TON Automotive and heavy-duty use Two-speed hand pump provides faster travel to load while the air/hydraulic (with load protection) allows for effortless operation Seven bed...

AFF 820A : 20 Ton Shop Press

SHOP PRESS 20 TON Automotive and light industrial use Eight level bed adjustment 20 Ton bottle jack with overload protection. 8 1/2" stroke Heavy-duty return springs for fast ram...

AFF 805 : 10 Ton Open Body Air/Hydraulic Foot Pump

AFF 805: 10,000 PSI Air / Hydraulic   SKU: 805   Develops up to 10,000 PSI pressure with overload protection Will operate all AFF rams Operates at 90 to 120 PSI 16 cu. oil capacity

AFF 7685 : 1" D-Handle Impact Wrench w/ 6" Anvil

Produces 1,912 ft-lbs. of hard hitting torque in both forward and reverse directions All-aluminum casing and rocking dog hammer mechanism make this tool powerful, durable, and reliable 6"...

AFF 7670 : 3/4" Impact Wrench

Aluminum hammer casing for greater durability and protection Convenient forward/reverse switch for quick directional changes Three forward and one reverse speed for maximum control Twin hammer...

AFF 7665 : 1/2" Impact Wrench w/ 2” Anvil

Steel hammer casing for greater durability and protection Convenient foward/reverse switch for quick directional changes Adjustable throttle settings for maximum control Hammer and anvil...

AFF 7660 : 1/2" Impact Wrench

Aluminum hammer casing for greater durability and protection Convenient forward/reverse switch for quick directional changes Adjustable throttle settings for maximum control Twin hammer and...

AFF 583 : Engine Support

ENGINE SUPPORT   Provides overhead engine support for removal of transaxle on FWD vehicles Ideal for four- and six-cylinder, FWD vehicles Adjusts from 26-1/2 to 49-1/2 wide with 18-3/4 screw...

AFF 806 : 10 Ton Air/Hydraulic Foot Pump

AFF 806: 10,000 PSI Air / Hydraulic   SKU: 806   Rugged lightweight aluminum reservoir Converts rams from manual to air/hydraulic operation Will operate all AFF rams including large diameter...

AFF 582 : 2200 lb. Engine Tilter

ENGINE TILTER 2200 LB   Can be used with all model AFF cranes, as well as competitive models to efficiently change an engine's center-of-gravity when installing or removing from a vehicle. 23-1/2...

AFF 571B : 1000 lb. Engine Stand

ENGINE STAND 1000 LB Wide 4 point "H" type base ensures good stability Adjustable brackets allow maximum flexibility “ fits most small engines 360° rotating head enables engine to be placed in...

AFF 3598 : 10 Ton Air Lift

The AFF Air End Lift is designed with an extra-wide stance to lift the entire front or rear of large trucks, buses, industrial, heavy-duty construction equipment, and large farm vehicles.

AFF 3584 : 6000 lb Heavy Duty Engine Crane

6000 LB HEAVY DUTY ENGINE CRANE Heavy Duty engine crane with reinforced leg assemblies for added strength and durability 4 different boom settings: 3 T, 2 T, 1.5T, 1T 12 Ton hydraulic ram has...

AFF 3400A : 10 Ton Air Lift Axle Jack

10 TON AIR LIFT JACK   SKU: 3400A   This Air Lift Jack is designed for lifting and supporting trailers, large trucks, buses, farm, industrial, and construction equipment. 10-ton capacity...

AFF 3344Sd : 15,000 lb. Truck Stand - Short

AFF 3344SD: 15,000 lb. Capacity Short Truck Stand   SKU: 3344SD   Adjustable height range from 36 to 54 Seventeen 1 height adjustments Non-skid rubble saddle for secure placement Spring...

AFF 3342Sd : 15,000 lb. Truck Stand - High

AFF 3342SD: 15,000 lb. Capacity High Truck Stand   SKU: 3342SD   Adjustable height range from 57 to 82 Twenty one 1 height adjustments with 4 fine adjustment by screw Spring loaded casters...

AFF 3340Sd : 33,000 lb. Truck Stand

AFF 3340SD: 33,000 lb. Capacity Truck Stand   SKU: 3340SD   Adjustable height range from 57 to 82 Twenty one 1 height adjustments with 4 fine adjustment by screw Spring loaded casters allow...

AFF 3320A : 3/4 Ton Underhoist Stand W/Foot Pedal

AFF 3320A: 3/4 Ton Under Hoist Stand   SKU: 3320A   Designed to support vehicle components Adjusts from 54.5 to 80.5 Includes foot operated pump for extra lift Bearing included for smooth...

AFF 3315A : 2 Ton Under Hoist Stand

AFF 3315A: 2 Ton Under Hoist Stand   SKU: 3315A   Designed to support vehicle components only Ideal for exhaust and suspension work Adjusts from 55 to 85.5 Bearing included for smooth...

AFF 3165 : Transmission Adapter

TRANSMISSION ADAPTER   Converts any AFF 350 series or Viking floor jack (or others with a 1-1/8" saddle stud) to remove and install automobile transmissions, transfer cases and differentials...

AFF 31400B : 40 Gallon Parts Washer

  AFF 31400B 40 Gallon Industrial Parts Washer   AFF Parts Washers are designed for fast and efficient cleaning of vehicle parts and sub-assemblies. All have durable baked enamel finishes and...

AFF 31350B : 3.5 Gallon Parts Washer

AFF 31350B: 3.5 Gallon Parts Washer   SKU: 31350B   3-1/2 gallon working capacity 45 GPH pump output UL listed on complete unit 18-1/2 x 13-1/2 x 9 overall dimensions Ship weight 18 lbs.

AFF 31200B : 20 Gallon Hydra - Flow Parts Washer

  AFF 31200B 20 Gallon Hydra-Flow Parts Washer   AFF Parts Washers are designed for fast and efficient cleaning of vehicle parts and sub-assemblies. All have durable baked enamel finishes and...

AFF 3591 : 450 lb. Truck Wheel Dolly

AFF 3591: 450 lb. Truck Wheel Dolly   SKU: 3591   Easily handles newer design super wide tires 26 wide carriage handles tire diameter 36-48 450 lb capacity Heavy duty tubular steel construction Bent...

AFF 3160 : 450 lb. Transmission Jack

TRANSMISSION JACK 450 LB Adjustable head for easier positioning and alignment Nylon safety strap to secure load Requires 1/2" drive ratchet (not included) 450 lb. capacity Height: 7-1/4" -...

AFF 3590A : 300 lb. Truck Wheel Dolly

AFF 3590A: Truck Wheel Dolly   SKU: 3590A   Designed for "one-technician operation" reducing repair labor costs. Ideal for road service applications.   300 lb. capacity Rugged tubular steel...

AFF 2158 : Transmission Jack 1100 Lb

TRANSMISSION JACK 1100 LB Single-stage telescopic ram for use on automobile, light truck and van transmissions, transfer cases or differentials in under-hoist applications.   Universal head provides...

AFF 3577 : 1500 lb. Heavy Duty Wheel Dolly

AFF 3577: 1.5 Ton Heavy Duty Wheel Dolly   SKU: 3577   Lift arms adjust inward and outward to handle a variety of different wheel combinations Provides extra low access for easy placement of...

AFF 200T : 2 Ton Low-Profile Floor Jack

2 TON LOW-PROFILE FLOOR JACK Built with traditional AFF quality, perfect for today's lower-profile vehicles. The 200T quickly lifts from a low 2-3/4" to 20" with AFF's double-pumper advantage...

AFF 208 : 2 Ton Aluminum Service Jack

2 TON ALUMINUM SERVICE JACKLightweight anodized aluminum framePolished plunger pistons provide a smooth surface for longer seal lifeWiper seals prevent dirt from entering hydraulic systemTwin...

AFF 3102 : 2000 lb. Manual Hydraulic Transmission Jack

AFF 3102: 2000lb Manual Hydraulic Transmission Jack   SKU: 3102   Two stage telescopic ram designed for medium duty transmissions, transfer cases, and differentials Double pump hydraulic...

AFF 3102A : 2000 lb. Air Assist Hydraulic Transmission Jack

AFF 3102A: 2000lb Air Assist Hydraulic Transmission Jack    SKU: 3102A   Two stage telescopic ram designed for medium duty transmissions, transfer cases, and differentials Double pump...

AFF 3180A : 4400 lb. Transmission Jack

TRANSMISSION JACK 4400 LB   SKU: 3180A   AFF has the only super heavy-duty transmission jack with a 4,400 lb. capacity. Built "forge-tough" to handle removal, transport and installation of...

AFF 3502 : 2 Ton Bottle Jack

  BOTTLE JACK 2 TON   AFF Bottle Jacks are built Forge-tough in a wide selection of capacities for automotive, marine, construction, industrial and agricultural applications where the ability to...

AFF 3602 : 2 Ton Super Duty Bottle Jack

AFF 3602: 2 Ton Super Duty Bottle Jack   SKU: 3602   Widely used in heavy duty truck, agriculture, mining, and oil field applications Constructed of high-grade steel and built to exacting...

AFF 3182 : 2,500 Lb. Power Train Lift/Table

2,500 LB CAPACITY POWER TRAIN LIFT/TABLE   This lift handles transmissions and fuel tanks as well as engines, transaxles, large electric vehicle batteries, and more. It also serves as a work table...

AFF 210 : 3 Ton Aluminum Service Jack

3 TON ALUMINUM SERVICE JACK SKU: 210 Lightweight anodized aluminum frame Polished plunger pistons provide a smooth surface for longer seal life Wiper seals prevent dirt from entering...