Challenger - Accessories

Challenger VLE10EH2 : LE10 2FT Column Ext. Kit

2 ft. column height extension kit for Model VLE10, includes new length cables and all necessary hardware - Results in 167.875 in. overall height. When purchased separately from lift, serial number...

Challenger BT3300 : Lift Table 3300 LB

Used to facilitate and safely perform the installation and removal of EV batteries, electric car battery packs, transmissions, gearboxes, clutches, engines and various components of the car chassis...

Challenger 40707L : Extended Ramps

Extended length drive-through ramp kit for 4115 series

Challenger B2280PR : GM New Style Adapters (1 Pair)

Extra-wide, heavy-duty polyurethane footpads designed for ’19+ model GM ® half-ton trucks, including Chevrolet ®, GMC ®, and Cadillac ®.Pad Replacement: #B2280-01

Challenger 10333-RJ : Sprinter Adapter Kit for Rj7.5 or Rj9

Challenger 10333-RJ, Sprinter Adapter Kit for Rj7.5 or Rj9 includes (2) pin adapters and (2) cradle adapter

Challenger 10266L : 48" Long Louvered Ramp Kit

Challenger 10266L, 48" Long Louvered Ramp Kit, for low profile vehicles (4P14, 4015 series only)

Challenger 10313 : Stack Adapter Extension - 6"

Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Lift out the screw pad, drop in the stack adapter extension and replace the screw pad to reach...

Challenger 10333 : Sprinter Engagement Kit

Sprinter adapter kit includes (2) pin adapters and (2) cradle adapters for 15000-3S series only 

Challenger 10354 : Surface Mounted Steel Hose Guard Kit

Challenger 10354, Surface Mounted Steel Hose Guard Kit for SRM10 or DX77 lifts. Includes 2 pieces @ 64 in., 1 piece @ 20 in. and mounting hardware. Painted safety yellow.

Challenger 10355-6 : 6 Inch (pair) stack extensions

Challenger 10355-6, 6 Inch (pair) stack extensions for RJ6 6,000 lbs. & RJ7.5 7,500 lbs. capacity rolling jacks

Challenger 10355-9 : 9 Inch (pair) stack extensions

Challenger 10355-9, 9 Inch (pair) stack extensions for RJ6 6,000 lbs. & RJ7.5 7,500 lbs. capacity rolling jacks

Challenger 40200-3D : Bolt-On Alignment Kit w/o Turn Plate

Challenger 40200-3D, Bolt-on alignment kit without turn plates [4P14, 4015 series only] - 3D alignment compatible

Challenger 40200-3DBK : Bolt-On Ali Kit w BlkTurn Plates

Challenger 40200-3DBK, Bolt-on alignment kit with black powder coated turn plates [4P14, 4015 series only] - 3D alignment compatible

Challenger 40200-3DSS : Bolt-On Alignment Kit w/ SS Turnplates

Bolt-on alignment kit with stainless steel turn plates [4P14, 4015, and 4115 series only] - 3D alignment compatible

Challenger 40230-E : Int Air Line Kt Dual Rolling Jack Op

Challenger 40230-E, Internal air line kit for dual rolling jack operation [4P14EFX, 4015E series only]

Challenger 4030-RA : Drive Thru Ramp Assembly fits 30:000 Ib

Challenger 4030-RA, Drive thru ramp assembly - Fits 30,000 lb 4030 series 4-post models

Challenger 4030-RA6 : Drive Thru Ramp Assembly, 6ft Long

Challenger 4030-RA6, Drive thru ramp assembly, 6ft long - Fits 30,000 lb 4030 series 4-post models

Challenger 44AK18 : Internal Air Line Kit

Challenger 44AK18, Internal air line kit for dual rolling jack operation 44018 series only

Challenger 44AK30 : Internal Air Line Kit

Challenger 44AK30, Internal air line kit for dual rolling jack operation 4030/44030 series

Challenger 44AK40 : Internal Air Line Kit

Challenger 44AK40, Internal air line kit for dual rolling jack operation 44040 through 44060 series only

Challenger 44RK18 : Pivoting Ramp Kit : 39" Long

Challenger 44RK18, Pivoting Ramp Kit, 39" Long - for drive-through operation Models 44018, 44018E

Challenger 44RK30 : Pivoting Ramp Kit : 36" Long

Challenger 44RK30, Pivoting Ramp Kit, 36" Long - for drive-through operation 44030 series

Challenger 44RK40 : Fixed Ramp Kit : 96" Long

Challenger 44RK40, Fixed - 96 in. long - for drive-through operation 44040, 44050, 44060 series

Challenger 44RKE18 : Pivoting Ramp Kit : 52" Long

Challenger 44RKE18, Pivoting Ramp Kit, 52" Long - for drive-through operation Model 44018AR

Challenger 44RKE30 : Extended Pivoting Ramp Kit : 72" Long

Challenger 44RKE30, Extended Pivoting Ramp Kit, 72" Long - for drive-through operation 44030 series

Challenger CLHM-CVR-H : Half Covers for Mobile Columns

Challenger CLHM-CVR-H, Half Covers for Mobile Columns (Each)

Challenger CLHM-ELA-90A : End Lift Adapter, Set of 2

Challenger CLHM-ELA-90A, End Lift Adapter, 9,000 lbs. capacity (per column - used to support vehicle from front and rear) (1 pair) *Designed specifically for Humvee lifting.

Challenger CLHM-FLA : Fork Lift Adapter, 15,000 Capacity

Challenger CLHM-FLA, Fork lift adapter, 15,000 capacity - used to raise fork lift 64 in. (Complete set for pair of columns)

Challenger CLHM-FLA-3WA : Wheel Fork Lift Adaptor (Each)

Challenger CLHM-FLA-3WA, 3rd Wheel Fork Lift Adaptor (Each), For use with CLHM-FLA

Challenger CLHM-GS : Glare Shield for Mobile Column Screens

Challenger CLHM-GS, Glare Shield for Mobile Column Screens (Each)

Challenger CLHM-LS-LK : Light Kit, 2 Lights Per Kit

Challenger CLHM-LS-LK, Light Kit - used to illuminate work areas under the vehicle, 2 lights per kit - 1 light per column uses power from column battery source

Challenger CLHM-RAR-20 : Rear Axle Restraint - 2:000 Lb

Challenger CLHM-RAR-20, Rear Axle Restraint - 2,000 lb For use with multiple rear axle vehicles. (Each)

Challenger CLHM-SP-240 : Wing Plow Adapter for the Clhm

Challenger CLHM-SP-240, Wing plow adapter for the CLHM. Allows wider clearance for lifting vehicles with wing plows or recessed wheels.

Challenger CLHM-TKP-120 : King Pin Adapter, Used Clhm-Cb-32A

Challenger CLHM-TKP-120, King Pin Adapter: To be used with the CLHM-CB-32A cross beam attachment. For lifting unattached, over the road trailers.

Challenger B2290 : Cab-Off Footpad Kit (Set of 4)

Part # B2290 (Sold in Sets of 4)Designed to safely lift cabs off truck frames with pads that feature a u-channel to cradle the pinch welds.Pad Replacement: # B2290-01

Challenger TFPK : Electric Vehicle Footpad (Set of 4)

Designed to support select electric vehicles, fits most Challenger 2-Post Lifts. (Set of 4)Pad Replacement: # 482365

Challenger 10317 : Reducer Bushing Kit

Challenger 10317, Reducer Bushing Kit for use with 10318 with 15K/18K 2-post lifts (set of 4)

Challenger CLHM-HR-300 : Clutch Jack : Air/Hydraulic Powered

Challenger CLHM-HR-300, Clutch Jack: Air/Hydraulic powered, 300 lbs. capacity, 360 degree rotating head, 80.5 in. maximum lift height

Challenger 10342 : Hanging Tool Holder Oil Drain Pan 10267

Challenger 10342, Hanging Tool Holder Oil Drain Pan 10267

Challenger 10267 : 32 Gal. Capacity : Oil Drain Pan Kit

Challenger 10267, 32 Gal. Capacity, Oil Drain Pan Kit (4P14 series, 4015 series, 44018 series & 44030 series)

Challenger 10500HD : Turning Radius Gauges

Challenger 10500HD, Turning Radius Gauges for 44030AR, 4030 alignment racks, black powder coat

Challenger 10500SS : Turning Radius Gauges

Challenger 10500SS, Turning Radius Gauges for 40 series, 4P14 series, 4115 series, AR4015 series, AR4115 series, and 44018AR alignment racks, stainless steel, works on a bolt-on kit

Challenger 10316 : Organizer Rack : Stack Adapter Extensions

Challenger 10316, Organizer Rack, Stack Adapter Extensions (10315, 10314, 10313, & 10318)

Challenger 10700 : Black Out Pump Kit

Challenger 10700, Black Out Pump Kit

Challenger RJ4.5 : Rolling Jack

Challenger's 4,500 lb. capacity hand pump rolling jack allows for free wheel access.

Challenger RJ7.5 : Rolling Bridge Jack

Challenger RJ7.5 Rolling jack - air/hydraulic operation - adjustable width, 7,500 lbs. capacity for 4P14, 4015 and 4115 series lifts. Includes integrated FLR. 

Challenger RJ9A : Air/Hydraulic Operated Rolling Jack

Challenger RJ9A Air/hydraulic operated rolling jack - adjustable width (34 in. - 42 in.), 9,000 lbs. capacity for AR44018AR/44018AR only

Challenger RJ9S : Air/Hydraulic Operated Rolling Jack

Challenger RJ9S Air/hydraulic operated rolling jack - adjustable width (34 in. - 42 in.), 9,000 lbs. capacity for 44018 series

Challenger CLHM-HTCJ-2000 : Transmission Jack : 2,700 Lbs.

Challenger CLHM-HTCJ-2000, Transmission Jack: 2,700 lbs. capacity, 30 in. start height, 72 in. maximum lift height, 360 degree rotating head with fore/aft tilt, 1st stage power: 100% air, 2nd stage...

Challenger B99700 : Tire Tool Manager Work Station

Challenger B99700, Tire Tool Manager Work Station with filter/lubricator/regulator (2-post only)

Challenger 10310 : Air and Electric Workstation

Challenger 10310, Air and Electric Workstation with filter/lubricator/regulator for 4-post lifts

Challenger B10264A : Air/Electric Workstation (2-Post Only)

Challenger B10264A, Air/Electric Workstation (2-Post Only) with filter/lubricator/regulator (2-post only)